Jump to content
SAU Community

Pics of Millenium Motorsports dyno day 6/11/04


Recommended Posts

my passage made 142.5rwkw and 330ftlb torque.

gotta get my intercooler piping done properly and not completely botched up by 1000 misc pipings and connectors :) waaay too restrictive for the t3/t4 turbo... i was hoping for the 160-170rwkw mark, but yeah :(

still does 13's :(

was a good day...came in a bit late but its all good,..saw some cars from SAU...the white GTR which im pretty sure from MELV..must say...AWESOME car,.would have stayed to see it go on the dyno but had to head back to sunny coast for work.

also saw MSP51 which i believe was Erins...my car was silver R33 GTST the one with the GT stripes on it.

Just bought the car not very long ago..wanted to see how much power it has and was quite happy..although i expected more he he.

done 156rwkw set on 8 psi

only known mods were 3in catback,.trust front mount and hks pod.--> seriously have no idea what other mods the car has..that's all i know---> FOR NOW.

and its time for an upgrade.

that's a good power figure for 8psi i think personally.

GTR man give carlos from millenium a call on 3348 2755 and tell him you saw it in the dyno day pics and wanted more information on it. I'm pretty sure he refills them and he has the setup on his supra so he would know the costs.

Some power figures for the day

Neil in his black rb20det 180sx 190rwkw

Stu in his white sr20det 180sx 192rwkw

josh in his white sr20det sil80 190rwkw

Mase in the povvo onevia rb20det 141rwkw with a fuel/air ratio of 10.2 rich rich

Melv in his white GTR 307rwkw

jaqule in his blue 33???

nismo 33 in his grey r33 156rwkw

chick in a Silver Supra 295rwkw

Red r33 built by hardcore performance rb25det 421rwkw's on the giggly juice

Chris sr20det green silvia 133rwkw's with air/fuel in low 10's

Scotty in champaigne 180sx sr20det 135 with similar air/fuel

Honda Accord with vtec engine upgrade 101fwkw's (almost put rwkw!!!)

Beannie in his r31 passage 142rwkw's (you just beat me you bastard!!!! :)) (air/fuel issues also)

Clint in his s15 pulled 163rwkw's

Overall the dyno day was great but showed quite a lot of us that we need to look at aftermarket fuel management if we want to see some decent gains due to some really rich air/fuel mixtures.

Few boys found out they were running very lean also, which may have saved them a lot of dosh down the track.

that's a good power figure for 8psi i think personally.

GTR man give carlos from millenium a call on 3348 2755 and tell him you saw it in the dyno day pics and wanted more information on it. I'm pretty sure he refills them and he has the setup on his supra so he would know the costs.

Some power figures for the day

Neil in his black rb20det 180sx 190rwkw

Stu in his white sr20det 180sx 192rwkw

josh in his white sr20det sil80 190rwkw

Mase in the povvo onevia rb20det 141rwkw with a fuel/air ratio of 10.2 rich rich

Melv in his white GTR 307rwkw

jaqule in his blue 33???

nismo 33 in his grey r33 156rwkw

Silver Supra owned by a hot chicky with pink interior 295rwkw  

Red r33 built by hardcore performance rb25det 421rwkw's on the giggly juice

Chris sr20det green silvia 133rwkw's with air/fuel in low 10's

Scotty in champaigne 180sx sr20det 135 with similar air/fuel

Honda Accord with vtec engine upgrade 101fwkw's (almost put rwkw!!!)

Beannie in his r31 passage 142rwkw's (you just beat me you bastard!!!! :)) (air/fuel issues also)

Clint in his s15 pulled 163rwkw's

Overall the dyno day was great but showed quite a lot of us that we need to look at aftermarket fuel management if we want to see some decent gains due to some really rich air/fuel mixtures.

Few boys found out they were running very lean also, which may have saved them a lot of dosh down the track.

mase how accurate is that dyno? u reckon??

i always was estimating my power to be anywhere from 160-180rwkw, and to pull only 142 i was disapointed.

yet people i've been speaking to have been saying that if im doing a 13.71 @104mph 1/4mile time, then i should be putting out about 180rwkw to even pull the weight of the passage along to that time. also worked out it was 142rwkw and 447nm torque... thats alot of torque for so little 'power' isnt it???

whats everyone elses thoughts?

beannie, your power figure was severely detremented by your fuel mixture. Maybe seeing as we cleaned your afm, the computer hadn't readjusted itself or something and you were running richer than normal????

If the dyno was reading low by around 20-30rwkw's then neil would have pulled a 220rwkw's. Is this possible on stock injectors???

With the boost you were running and your fuel mixture, i'd say that would be a good contribution to your lower power figure, but on the other hand, i do think the results may have been slightly lower (talking 10rwkw's max) than a few others around.

Just my thoughts anyway.

cheers for the pics guys

beannie, your power figure was severely detremented by your fuel mixture. Maybe seeing as we cleaned your afm, the computer hadn't readjusted itself or something and you were running richer than normal????

If the dyno was reading low by around 20-30rwkw's then neil would have pulled a 220rwkw's. Is this possible on stock injectors???

With the boost you were running and your fuel mixture, i'd say that would be a good contribution to your lower power figure, but on the other hand, i do think the results may have been slightly lower (talking 10rwkw's max) than a few others around.

Just my thoughts anyway.

cheers for the pics guys

neil has pulled 220rwkw according to a post he made about the car...somewhere, ive seen it ... maybe not these forums, dunno... but yeah..

i might take it to a dyno dynamics dyno at a different place for a '2nd opinion' and see what i get... but honestly, i personally think its impossible for me to get a 13.71 pass on only 140rwkw in a car that weighs almost 1500kg :) we'll see...

Keeping in mind it is a dynologics dyno and not a dynonamics dyno.

They read differently. For instance, I got 198rwkw on matty spry's dyno and then went to all star tuning at northside somewhere and got 168rwkw.

So you figures were in comparison to everyone else on the day.

also saw MSP51 which i believe was Erins...my car was silver R33 GTST the one with the GT stripes on it.

Twas me :) Just a question, what do those japanese characters on the back of you car mean?

Keeping in mind it is a dynologics dyno and not a dynonamics dyno.

They read differently. For instance, I got 198rwkw on matty spry's dyno and then went to all star tuning at northside somewhere and got 168rwkw.  

So you figures were in comparison to everyone else on the day.

Twas me :) Just a question, what do those japanese characters on the back of you car mean?

Those Japanese writings means " Japanese women are hot " or rather " Asian chicks are hotter " --> something like that.

sweet hey ?

neil has pulled 220rwkw according to a post he made about the car...somewhere, ive seen it ... maybe not these forums, dunno... but yeah..

i might take it to a dyno dynamics dyno at a different place for a '2nd opinion' and see what i get... but honestly, i personally think its impossible for me to get a 13.71 pass on only 140rwkw in a car that weighs almost 1500kg :) we'll see...

I don't actually have a 220rwkw dyno sheet, that's just an estimate based on past tunes at PITS and other people's power there. My boost was down 1.5psi from the last time i had it dynoed as well. However i have run 114.6mph which is well above what 191kw could run.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...