Jump to content
SAU Community

Recommended Posts

Hi all

Following on from my post about buying an R34, I thought it might be an idea to see who would insure it. I assumed someone like RACV would but apparently not! I called them and they wont touch R33, R34, Silvia or WRX but do currently insure my 270bhp cossie! I am a rating 1 driver but that made no difference, it is the cars themselves.

Short of driving a lada (no offence Jamezilla!), what performance vehicle can I drive and get insured on?

Any suggestions appreciated guys and girls.

Link to comment
https://www.sau.com.au/forums/topic/58096-insuring-your-skylines/
Share on other sites

Hey Ronin 09,

Yep RACV will insure R32 because Nissan did import for Oz market, and RACV does insure Import R32 i don't know why it does that... but RACV will insure Cefrio even though i'm 17

RACV are weird...

Cheers

Grant

RACV is a VERY weird one... they WILL insure imports, BUT they wouldn't insure my car because it has after market rims. NOT for the increased stealing factor but because it was a certain amount WIDER than the factory rim. Bcos it affects the performance of the car..... hello?? hello?? /waves hand in the air - wider rim, more rubber, (255's) more contact to the road, safer car?? Pricks.

Alan, you will NOT beat Just Cars. They have just set themselves right up for this market, and are actually pretty reasonable. Rating 1, for R34 i reckon, $1500? Which is bloody good i think. I reckon maybe a touch less. They want $2467 for me, full comp, with exhaust, suspension and wheel mods mentioned. Rating 4, drops to about $2000 for rating 3. Yeah, pretty steep, but relatively? It's not too bad for a P plater and car being a GT-T.

cheers,

chinny

Thanks guys for all the replies. SS8_Gohan - may have to take the option. They insure my girlfriends RX Liberty and said alloys and exhaust are fine if they are put on but the wheels must not exceed 7"?! I assume that is width but goes with what you are saying as well. I didnt really want to have to change companies as I have only just taken the policy out. Its $1000 fully comp for the cossie which I am not complaining about at all!

Hey saff_cossie,

Is your Cossie imported from Uk or Oz delivered (i doubt this) if it's Uk spec, then RACV are weird...

JCI is reasonable because i shopping around for my RB30 Patrol, RACV 3rd party, $717; i asked JCI, my quote was $710 3rd party... the most strange thing was... when i said i got turbo package RACV tought mine was diesel, JCI asked me if this is Modification, i said yes...

I'm 17 btw, young ppl get the most expensive insurance estimate because they are highly likely to be involved in accidents... You know insurance, they are like your parents...

keep shopping for insurance u might end up with the price ur happy with.

Cheers

Grant

Dreamer 33 - Imported it myself as it was my car in the UK. I like the every other young person have had insurance trouble with quotes on cars but thought I was virtually past all that, seems not with some companies.

Anyway got a quote from RACV on an Integra Type R 2000 model. They will insure that and for $500 extra on my current premium. Could be the way to go.

Ring Racv about once every 30 minutes and ask the same question and you will get a different answer everytime!!! They have no clue

that is so true

anyways - RACV - all import insurance has to get refferred to the underwriters who then decide if they will take it on or not.

it is completely a case by case basis (different for each person/car) - BUT IT IS POSSIBLE FOR THEM TO INSURE SKYLINES!!

keep trying them - when you do get a quote they are much cheaper than anywhere else.

beefy - dont have the R34 yet and at this rate might have to wait another year until I am 25. Just cars probably would insure me but I have several different policies with RACV and they have been very good with discounts etc.

If you are over 25 I wouldn't go anywhere else but Shannons.

I'm a lot younger then 25, and can get full comp as the 2nd driver for my fathers 911 with $25k+ worth of aftermarket rubbish.

I have found it really depends on the car... if your young. They wont insure my R32 under my name.. But they will under my fathers.. Yet I can get insurance on a euro worth 4 times the amount then my skyrice :rolleyes:

I'm a lot younger then 25, and can get full comp as the 2nd driver for my fathers 911 with $25k+ worth of aftermarket rubbish.

I have found it really depends on the car... if your young. They wont insure my R32 under my name.. But they will under my fathers.. Yet I can get insurance on a euro worth 4 times the amount then my skyrice :rolleyes:

Thats coz insurance companies consider skylines the car of choice for hoons!!

They obiviously watch way to much Today Tonight

Its not a turbo is it?  

As soon as you mention turbo the conversation always turns sour...

Yeap, it's an N/a. BUT... It's a Genuine RUF model.. quicker then a turbo as well :kick:

I just don't understand some one insuring a rare car with a young driver.. but not a $16,000 Nissan :rolleyes:

Ah well, as soon as Today Tonight start doing storys on young P platers driving euro's it'll all go out the window.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...