Jump to content
SAU Community

Recommended Posts

hi i own a r32 gtst rb20 so far i have a turbo back exhaust i think it's a hks super dragger, pod filter and front mount intercooler planning on upgrading the turbo and fitting a boost controller can anyone tel me if this is enough to break the 200rwkw mark pm or email thanks, i would like to be part of this rb20 club,

email: [email protected]

hi i own a r32 gtst rb20 so far i have a turbo back exhaust i think it's a hks super dragger, pod filter and front mount intercooler planning on upgrading the turbo and fitting a boost controller can anyone tel me if this is enough to break the 200rwkw mark pm or email thanks, i would like to be part of this rb20 club,

email: [email protected]

Depends what sort of turbo you plan on upgrading it to? If its something fairly big you might need injectors as well in which case an aftermarket computer/piggy back would be highly recommended.

hi i own a r32 gtst rb20 so far i have a turbo back exhaust i think it's a hks super dragger, pod filter and front mount intercooler planning on upgrading the turbo and fitting a boost controller can anyone tel me if this is enough to break the 200rwkw mark pm or email thanks, i would like to be part of this rb20 club,

email: [email protected]

haha, gotta make 260rwkw to be in this ilustrious club :P.

200rwkw from what ive read a hks gt2530 or a highflowed rb25 turbo should do the trick, consider upgrading the injectors and a good retune.

carl h

have you ever placed rb26dett cams into the rb20det with solid lifters??

I'm attempting this on mine. Something not quite sure on the fitment.

I have a post up for this on the forum if you have som clues :P

Turbine

www.horsepowerinabox.com.au usually have decent priced garret turbo's

never bought from them though so can't say anything on customer service etc

i need a gt30r! haha

anyone ever heard of someone rom tuning a redtop rb20det in australia?

www.horsepowerinabox.com.au usually have decent priced garret turbo's

never bought from them though so can't say anything on customer service etc

i need a gt30r! haha

anyone ever heard of someone rom tuning a redtop rb20det in australia?

Ive got some stuff off Morrie before and he is very helpful, parts were express posted and came the next day. I would highly recomend him to anyone.

Carl h.Can you tell me where you purchased your turbo from and how much did you pay. (gt30r)

cheers

hey there.

i think i paid about 1.1k$ usd, it was quite dear but so far its potential has been well worth the exta bit of coin.

i mean come on if i was making 387whp on 17psi on a low compression motor then its most certianly a testimate to how efficent that turbo really is, i simply cannot wait till i get the motor back together to see what she can really do.

i got mine from www.cheapturbo.com, talk to ken as he knows quite a bit about turbos and what not.

Hi Russel, hows the work on your car going?

Well to tell you the truth.......... very slow at the moment :P

I have half the parts i need, some are lost in the post and im waiting for more to be sent :P and my turbo has been queued for inspection and weighing at a transport company :) (now wish i ordered all the stuff through Morrie). I ordered all the stuff 2 weeks ago and had my mate organised to tig all the stainless pipework together this weekend.

I decided to just run a 3" pipe off the turbo (GT3071R) for now with a 2" wastegate pipe plummed in just before the cat to keep costs down a bit, would have liked a new 4" stainless exhaust but cant afford to do it at the moment and dont really think ill need it and can always do it later.

I will need to make 2 new intercooler pipes and a new air filter pipe for this turbo and i can tell you the stainless bends all add up, especially the 4" ones, this will be done next weekend if my stuff turns up.

Apart from that im going to try and neaten up the engine bay a bit, move a few relays and put in another one to control the thermo fans through the computer.

Some stuff is still undecided like where the new catch can is going and where a few hoses will be run.

I still need to get some heat wrap for the manifold and dump pipe and a turbo blanket for now, the plan is to get it all ceramic coated as well once im happy with the setup.

I would like to have it back on the dyno very soon but i think it will still be about 4-5 weeks away.

And who is gonna tune the wolf for me..............? Well i guess ill stert speaking to some people when the time gets a bit closer.

Anyway thats where its at for now, ill take some pics as the work gets done and post them up for whoever is interested and hope to make some half decent numbers soon :P

Im after some parts now for my rb20. So im wondering who is Morrie and how can we get in contact with him?

Thanks

www.horsepowerinabox.com.au

He is also a trader on nissansilvia.com

ok. any other people or online shops were we can find some bargins? any help appreciated.

dude, have you looked at the sponsors section of ns.com? there's heaps of good deals there!

check it out -> http://www.nissansilvia.com/forums/index.php?showforum=89

Troy, i say go the SR. lighter. plus less weight right up the front (cause it's shorter). souds like crap, but who cares. people wont laugh as you drive round the outside of them at turn 1 EC...haha

but i know you will never do it. you have been beating the RB20 drum for too long mate, no way to back out gracefully now my friend! lol

Troy and RB20 stuck for life....

Troy, i say go the SR. lighter. plus less weight right up the front (cause it's shorter). souds like crap, but who cares. people wont laugh as you drive round the outside of them at turn 1 EC...haha

but i know you will never do it. you have been beating the RB20 drum for too long mate, no way to back out gracefully now my friend! lol

Troy and RB20 stuck for life....

lol..i got an email from my boss, he is a member of some yahoo email/motorsport mailing list...89 GTS which had a seized engine...im guessing no oil and ppl at the docks giving it some stick. It was goign cheap, me gots to thinking track car...and SR amy make easier/better power. But from what i have been reading its just propoganda and the price of the RB gear isnt that more expensive.

LOl, then i remembered that i already have a GTST that is quick enough to be fun...and im not Kerry Packer so have to make do with what i got. :)

quick question can anyone reccomend a cam. The car will be hopefully make atleast 300kw ATW. Ive been looking at the tomei poncams, ive seen 2 options 256/8.5 or 260/8.5. I read in another forum that cam gears werent needed with these though that was with an rb25. Some help please.

cheers

cams are secret weapons, lol. cant give my specs sorry

Secret specs? LOL, hope you have spoken to your engine guy and sussed out the lifter aspect of the engine. Right now im struggling to work out how to make an engine reliably make power up top without fallign over because of the lifters pumping up :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List: 1.Anna S 2. Luke S 3. Jesse Givens-Lamb 4. Luca Stamatescu 5. Madeleine Stamatescu    
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
×
×
  • Create New...