Jump to content
SAU Community

Recommended Posts

12.8 on r-comps and 12.9 on genuine street tyres :)

plus i ran a 1.8 flat 60 foot on street tyres but clutch stuck to flywheel and couldnt smash box into 3rd haha

that was with enough power to run over 113mph (the run before), low 12 went begging!

i'll race u in the gtr instead hehe

Had my first tune today with the new engine got 1500 klms on it so there more potential in it yet,tuner thinks the plenum is stoping it atm but very happy with the result

post-7066-1179388107_thumb.jpg

cheers Peter

HOLY SHIT!

Decent numbers there!

I'd also love to know the spec's on the motor too!

sorry guys been busy

40thou oversize aries pistons

25 crank make it rb2.1ltr

ported and polished head

hks cams and cam gears

performance valve springs

garrett gt3040r turbo

hks low mount manifold

3" hks zorst

hybrid front mount

cai to standard airbox

550 sard injectors

Hehehe. Std RB20s pulling good numbers and good times. And legend finally gets his 20 back on the road. Great stuff peter. I cant imagine how much fun that car must be to drive. How is it for traction in top of 2nd and 3rd gear? What boost? Does the head work help it make power? Your thoughts?

LOL..i want to throw the HKS manifold and 3076 on. :kiss: 20G just wont make the top end i need to scare the big boys at Phillip Island and Sandown :P

Hehehe. Std RB20s pulling good numbers and good times. And legend finally gets his 20 back on the road. Great stuff peter. I cant imagine how much fun that car must be to drive. How is it for traction in top of 2nd and 3rd gear? What boost? Does the head work help it make power? Your thoughts?

LOL..i want to throw the HKS manifold and 3076 on. :kiss: 20G just wont make the top end i need to scare the big boys at Phillip Island and Sandown :P

im curious also about the head work, what exactly was done to it and whether its worth it bang for buck.

Edited by silver gts-t

hehe...there are still a few ppl down here that attribute the speed of my car this year to a cheater spec motor. Its just that for the first time in a good many years i have a working diff, good rubber and a tuner that knows what he is doing, so not having to drive around too many problems. Cant wait to get the new suspension working

you'll run into the 12's, but a low 12 required stock rear strutts and coils, i ended up with positive camber on the back when we put them in which sqaured the tyres out on the launch.

and you'll need micky thompson e/t's

my 13.1 in street trim was on 20 psi aswell, when i up'd it to 24 i couldnt get it to hook up till 4th

the 16c rear isnt THAT bad hahaha, i see full boost 24psi by 4700.

Do you run ARP head studs and aftermarket headgasket? I'm just wondering how far I can go with the boost on my RB20. I was planning on a max of 25psi but if your doing that on the stock head studs I might just push for 28psi. I'm running the head studs, Tomie headgasket, sard 800cc injectors, Prescion SC61 turbo, PFC, Tomie 270 cams, rips intake ect. I think I might need to run alot of boost before that turbo is happy. I just hope she will hold the PSI and I won't try to blow the motor.

Hey guys

Just back from the dyno day ,had issues with fuel leaning out at higher rpm but was pretty impressed with what it made by 5300rpm will post graph

Roy ,its great to be driving it again feels awesome pulls like a train but its still a new engine it will get better as it beds in some more its got like 1600k's on it now so there lots of playing to go.On high boost what traction and high boost is 23psi

I'll try to answer your's and Johns q about the head work and its value at once .With the old bottom end I never had any trouble with high rpm's leaning out it could also be crank and bigger bore that helping this but alot more air flow will cause it to so the 1mm oversize valves and I spent a bit of time doing the ports again in my opinion has help with power but I think its helped more along the lines of torque its feels heaps better hills that i'd drop down a gear b4 now cruise over it top no trouble but more than that i think its reduced lag time a fair bit you'll see it in the dyno graph I got today as I didn't get one when I got it tuned 4got was to stocked with it toping 300rwkw

Butters

it would if I had 82mm pistons but mine are only 40thou oversize 79mm standard is 78mm

I'm thinking about doing a post on this rebuild with all information I have as took heaps of pic's during build but thats for a latter time his todays dyno graph

post-7066-1179560662_thumb.jpg

you can see where his backed of at 5300rpm here but here is where you can see where full boost has come in all the work I did with the flow honing has paid of and the head work has helped this as well usable power

Do you run ARP head studs and aftermarket headgasket? I'm just wondering how far I can go with the boost on my RB20. I was planning on a max of 25psi but if your doing that on the stock head studs I might just push for 28psi. I'm running the head studs, Tomie headgasket, sard 800cc injectors, Prescion SC61 turbo, PFC, Tomie 270 cams, rips intake ect. I think I might need to run alot of boost before that turbo is happy. I just hope she will hold the PSI and I won't try to blow the motor.

the motor hasnt even had the rocker covers removed let alone aftermarket gasket/studd's :P

that is bullshit response! at 4200 you are making 250kw!!! awesome. Maybe i should turf my RB26 and whack in a 20?

i cant believe it thats f**king insane :) i think i almost should have stuck with my 20 now.. and poured as much money into it as i have my 26

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...