Jump to content
SAU Community

Recommended Posts

Roy as far as we know, and very confident on it.. the internals of the motor are as stock as they come, no cams, cam gears nouthing

it appears to be running the stock head gasket and the sump and oil pump dont show any signs of removal befor, we will be doing a comp test this weekend.

its very basic to an extent, trust td-06 with the 16c rear, EMS stinger ecu, 34 gtr injectors, tial 38mm gate, profec b spec II on 24psi high 20 low, 76mm china cooler kit then usual exhaust-intake stuff

if the weather holds up for next wednesday im goin to return the car back to the drag setup and try and get a run in at the last street meet for the season, it feels like its a shit load faster now then when it was last on the track :)

im sorry but.. is there any outher 12.0 or lower unopened rb20 r32 in australia??

martini race fuel http://www.martiniracing.com.au/html/fuels110.htm thats what i'll be using if i choose to (at this moment i see pump fuel is a greater acheivement)

Sure is, my mates 32 which i sold on here a couple of years ago, ran a 11.8 @ 116mph. ON that run it popped the motor at 3/4 track but stayed into it.

That was stock motor, manifold, injectors & ecu (had a chip though). Was laggy as f**k but it ripped.

h.

Sure is, my mates 32 which i sold on here a couple of years ago, ran a 11.8 @ 116mph. ON that run it popped the motor at 3/4 track but stayed into it.

That was stock motor, manifold, injectors & ecu (had a chip though). Was laggy as f**k but it ripped.

h.

mint atleast i know what to aim for next week :P

conversion coming along slowly

i need some panel n paint done first

and a diff

finding a diff for a hr31 isn't easy!

then i can start collecting the cool stuff for conversion:)

i have front cut already though

What is wrong with the current diff in it?

R200 long noses are a mechanical 1 way diff from factory.

If its a single spinner get an LSD centre off a Z or similar and put your gearing in it...some new clutch packs and voila.....

That is what I am doing. Minus the LSD as I already have one.

If ya wanna know more speak to R31 Nizmoid or look at the array of info on the R31 club

hks 2835 is a nice turbo!

my mates s13 which i'm using atm has one on his sr

and i'm pretty sure the dude with the rb20 120y has done 11s adam and don't think he's opened the motor yet

i cant be bothered going for a look haha

I am running 20 thou low comp forgies... Top end is std tho :/ 11.0 @ 118

Juat reading through some of the first few pages of this thread. Around 30 months later its interesting to see how the goal posts have moved and thinking changed. 220rwkws with a GCG Hi Flow was thought to be about it for an RB20. We are now getting better response and more power out of them just by experimenting a little with setups.

If you could get the air in to the RB20DET with reasonable boost I think the RB20DET will hold 450hp no problems.

AD4M, lol 24psi is more then what i would call reasonable. But hey, its hanging together. Fingres crossed you pull some great times and it holds together.

Can i ask whether you think it will hold together at that boost? Or is it a matter of you not caring if she goes bang :/

Compressor:

- Wheel: 82mm w/ 56 trim

- Housing: .70 ar

- Type housing w/ 4" Inlet & 2.5" Outlet

This turbo incorporates the same GT40 compressor wheel found in the popular GT35, but runs the smaller 60mm w/84 trim turbine wheel from the GT30R. Appropriate for smaller engines where the GT35/40R feels too big, but the high amount of compressor flow is needed for the desired HP. Comes with a large T04S style compressor housing with 4.00 inlet and 2.50" outlet

These are the only spec's I could find on it

Cheers Peter

Whoops still logged on as daughterinlaw

if the weather holds up for next wednesday im goin to return the car back to the drag setup and try and get a run in at the last street meet for the season, it feels like its a shit load faster now then when it was last on the track :unsure:

Ill be watching this space closely !

Good Luck dude !!

QUOTE(RNS-11Z @ 24 May 2007, 02:00 PM)

Sure is, my mates 32 which i sold on here a couple of years ago, ran a 11.8 @ 116mph. ON that run it popped the motor at 3/4 track but stayed into it.

whats next... stock turbo? According to ur statement above it would have done an 11.3 if it hadnt blown 3/4 down the track.

Are we still talkin about a RB20?

Stock everything = 500HP LOLOL

Edited by jnr32r
What is wrong with the current diff in it?

R200 long noses are a mechanical 1 way diff from factory.

If its a single spinner get an LSD centre off a Z or similar and put your gearing in it...some new clutch packs and voila.....

That is what I am doing. Minus the LSD as I already have one.

If ya wanna know more speak to R31 Nizmoid or look at the array of info on the R31 club

i know all of the above but thanks anyway dude:)

car has been off the road for a while and i sold the factory lsd to a mate with plans of getting a aftermarket 2 way for it and i've been a member of the r31 club for a couple years now:)

thanks

AD4M, lol 24psi is more then what i would call reasonable. But hey, its hanging together. Fingres crossed you pull some great times and it holds together.

Can i ask whether you think it will hold together at that boost? Or is it a matter of you not caring if she goes bang :)

to tell you the truth Roy I'm not worried if it goes bang, got a few spares :unsure: the motor was running insanley rich but now its back into a more leaner tune so time will tell how it holds up

Yeh fair enough. I understand completely as im in the same boat. Happy to run 1.3bar with the occasional hits of 1.5bar as RB20s are so cheap and i have something better in the wings. But in no huury to throw in a stronger motor because at the moment the engine is faster then the suspension at the moment. So can go quicker yet once i get the suspension sorted. Something very satisfying about pulling away from built RB25s etc down the straights at the track :unsure:

Something very satisfying about pulling away from built RB25s etc down the straights at the track smile.gif

Haha this awesome feeling is what keeps u guys from going to rb25 or something :unsure: LOL

Edited by robots

roy mate i will be using the gt30r, the one with those specs which is the same core specs as the hks3037s

should be starting it tomorrow, need to tune it roughly and drivable, then off to JEM for the fine tune

i have:

autronic ecu 550cc rx7 series 5 injectors 044 pump CPC plenum port polished head/manifold 1mm oversized valves hks valve springs gt30r 38mm tial wastegate

hopefully i should get around the 240-260rwkw mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...