Jump to content
SAU Community

Recommended Posts

hey all, i tried abit of a search but to no avail..

Im wishing to lower my ride, and im guessing the options are springs and shocks or coilovers.. i dont think theres much value in placing different shocks and springs in, probably reduce the handling performance.. so i should get coilovers which will enhance it..

i want ones that will be perfect for dropping the ride height and very soft for street use.. whats your opinions??

thanks all help greatly appreciated@

Link to comment
https://www.sau.com.au/forums/topic/60647-best-coilovers-for-a-street-r32-gtr/
Share on other sites

i think the consensus is billstiens with king springs from what ive read on the forums.

When I was talking to Chris at Centreline suspension, he strongly suggested Koni's over Bilsteins for street use, he's had a lot of Bilsteins come back very worn after street use. However for the track, he said the exact opposite is true.

And Whiteline springs offer more choices of rates. Could look into Whitline Group 4 coil overs, they are quite expensive at around $2200 trade, the sales rep said to expect a price drop soon however.

I got Bilsteins from Quadrant in Vic for around $1G, then probably $400 for a set of 4 kings springs (can't remember exactly).

Bilsteins give a VERY firm ride - you might want the Quadrant guys to soften them up a bit for you.

Potenza NPG

design by bridgestone.

I will always keep buying full set of suspension, which include spring.

as the shock have to meet a fix spring rate to perform the best, else it will under rebound or over, hence bad cornering and increase worm.

Hi - what is the difference between a coil over and shock + spring?

LOL nothing:) My understandign is that all Skylines have coil overs std, as opposed to struts/leaf springs etc etc.

But when ppl refer to coil overs they normally mean coil over shocks with height adjustable platforms:)

Suggest Konis for the road, Bilsteins for the track. Konis are damping adjustable, you might need to revalve the Bilsteins to get a nice road ride. Have heard Billy's are a bit harsh for the street otherwise. Don't go below 350mm hub to guard or you'll run into alignment probs and need adjustable susp bits to compensate.

Make sure your bump stops are in good nick and the right type also. Many people forget about the bumpstop.

Talk to Toperformance in Melbourne, East Coast or Heasman's suspension in Sydney, or call Kings springs in Qld, they in particular are very helpful. And if someone says 'yeah these springs are 20% stiffer' as salesmen are likely to do, ask them WHAT THAT MEANS TO YOU. If they tell you it's just stiffer, ask them to explain what you will notice and if they can't tell you apart from the bleeding obvious 'firmer ride' go elsewhere. They should tell you that a 20% increase in stiffness is about the point where you'll start to notice a difference. At least that gives you some indication of seat of the pants feel.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...