Jump to content
SAU Community

Power FC or Mines ECU?

YunisA

By YunisA,
in Engines & Forced Induction

 Share

Recommended Posts

YunisA Contributor

YunisA

Posted
Posted

Im currently in a dilemma, I want an engine which is good for low down responce/torque and performance for everyday street use. Im going for 2530's or GTSS turbos. As for ECU Mines are known to make responsive cars, and I was told to go the mines ecu route, Im looking for about 550-600 bhp....but I am also considering the power fc

any tips advice would be welcome

Link to comment
https://www.sau.com.au/forums/topic/62297-power-fc-or-mines-ecu/
Share on other sites
Nacho Vidal Enthusiast

Nacho Vidal

Posted
Posted

who will tune a MINES ECU??? the main thing when considering an ECU is what tuners are available to you, and what do they specialise in? You are in London? I read an article from your Japanese Performance Mag, on the autronic ecu... Best bet is to find the tuner you want to use, and ask what he prefers to tune, and there is your choice.

Nacho Vidal Enthusiast

Nacho Vidal

Posted
Posted

firstly are the gt2530's still available? i know that many of the GT series are discontinued. They are rated at 320ps each and would be perfect for the power you want, and you can still get them 2nd hand.

The GTSS's would be awesome for response, but are rated slightly less at 280ps. but im sure if you get a pair of them setup and tuned you wont be complaining!

who will tune a MINES ECU??? the main thing when considering an ECU is what tuners are available to you, and what do they specialise in? You are in London? I read an article from your Japanese Performance Mag, on the autronic ecu... Best bet is to find the tuner you want to use, and ask what he prefers to tune, and there is your choice.

Nacho Vidal Enthusiast

Nacho Vidal

Posted
Posted

firstly are the gt2530's still available? i know that many of the GT series are discontinued. They are rated at 320ps each and would be perfect for the power you want, and you can still get them 2nd hand.

The GTSS's would be awesome for response, but are rated slightly less at 280ps. but im sure if you get a pair of them setup and tuned you wont be complaining!

who will tune a MINES ECU??? the main thing when considering an ECU is what tuners are available to you, and what do they specialise in? You are in London? I read an article from your Japanese Performance Mag, on the autronic ecu... Best bet is to find the tuner you want to use, and ask what he prefers to tune, and there is your choice.

Power FC i believe is really your only plug and play option and used with proven results here in Aus, but as said above, you tuner has to like it.

pnblight Mentor

pnblight

Posted
Posted

ok ecu got to be power fc an awesome unit and easy to tune to what ever setup you like throught hand controller or datalogger.

turbos your on the right track but there is also the ball bearing garret 320hp turbo which is very similar to the 2530s but maybe a bit better responce down low and a little less high boost(1.7bar) capabilities (ownly my opinion) a very good compo

with these to mods you might want to consider rb20/25 afm(cheaper than z32 and good to about 540rwhp) and 700cc sard injectors ,cos as you tune up the setup you will fast run out of fuel (injectors) and air flow monitoring (afm)

hope this helps

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Im currently in a dilemma, I want an engine which is good for low down responce/torque and performance for everyday street use. Im going for 2530's or GTSS turbos. As for ECU Mines are known to make responsive cars, and I was told to go the mines ecu route, Im looking for about 550-600 bhp....but I am also considering the power fc

any tips advice would be welcome

get the PowerFC

you'll never regret it

lwells Grand Master

lwells

Posted
Posted

If you don't live in Japan or have access to someone with experience with re-programming the Mines units, you would be nuts to choose one. Even if you did have someone that could re-program it, the hassle just isn't worth it IMHO.

Power-FC all the way.

LW.

Yorik Community Regular

Yorik

Posted
Posted

Power FC all the way..

Lots of people use other ECU's and have issues with things like Cold Starts (applies to you) running air con (applies to me) and getting good smooth idles with alrger injectors. POwer FC's are beign used all over the world succesfully, the only downside that I can see to a Power FC (minimal if tuned well) is that they don't have effective tempeterature compensation, as I said this can be tuned easily and with excellent results..

Also take into account the FC-Datalogit package where you can modify all the options in the Power FC, that you can't do with the Hand Controller, like Fan switch on temps below 95 deg.. also you can then have launch control and extra intputs as well as full logging and view the whole map at once.. Check the FC-Datalogit website.. http://www.fc-datalogit.co.nz/

I was going to go with either a Power FC or a Wolf 3D V4, but after a few comments from people with the Wolf's I decided to go with the Power FC.. THis is being tuned in February in Perth and I will be picking up a FC-Datalogit shortly afterwards.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...