Jump to content
SAU Community

Recommended Posts

I saw in a motor mag today the Typhoon is only 6.4 sec to the 100km/h.

I thought a standard R33 should do low 6s. So off the lights or drag on the 1/4 mile the skyline should hold it?

I got done by a newish V8 commo ute on a private rd. I just let out the clutch and floored it.The V8 looked a little hot, Maybe just an SS though, manual. The ute was pulling quite hard. With the turbos you have to get the revs up off the line a bit right? Looked like he didn't really get an awesome start either. You could see the V8 had more power. Though maybe if got a good start could have stayed with him.

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

From what I have read, the R33 GTST (I assume you are not talking about the GTR), does 0-100 in 6.2 and 1/4 in 14.37 (from memory). Not sure if these figures are accurate. I sure don't feel as though my car does 0-100 in 6 something (only mods being cat back exhaust and pod filter).

I think you would have to have a few mods to beat the current v8 Holdens and Fords. Don't get me wrong, I'm not fond of these cars, in fact I would never buy one. It's just that they have that much torque that to keep up off the line you really have to give it a bootfull. Maybe I need to get some mods and then i would feel differently.

my car only has cat back and running the 7psi sloenoid open all the time. But yeah I reckon the extra power and torque once they are underway can be seen. Off the line I just let out the clutch and floored it but to be a chance I would have had to drop it a bit. We were both equal to about 20km/h then he started to pull a bit probably about a car length to 100kays I reckon. I have a dump pipe ready to go on, hopefully that will help but yeah the v8s have a bit of power these days.

Maybe I should get over it. ...

my car only has cat back and running the 7psi sloenoid open all the time. But yeah I reckon the extra power and torque once they are underway can be seen. Off the line I just let out the clutch and floored it but to be a chance I would have had to drop it a bit. We were both equal to about 20km/h then he started to pull a bit probably about a car length to 100kays I reckon. I have a dump pipe ready to go on, hopefully that will help but yeah the v8s have a bit of power these days.

Maybe I should get over it. ...[/quote

did you knwo that a v8 need only spend about 3grand to make his engine chop any gtst and some gtrs. like i said not to be underestimated

your kidding me!!! 250 rwkw and finding it hard to pull away. I thought with 250 you would easily do it.

there goes my plan (one of many) to add say $2k's worth of mods to get up to speed. I would need to spend $5-10k to get 250 rwkw wouldn't I?????!!!!

I once under estiamted the v8's. when my friend gave me a ride in his dad's clubbie. it was the one with the 5l motor with 195kw @ fly@. This was back in 2000. Then a year or two later his dad bought a Gen III holden with 225kw and I thought it was pretty quick. Just pulled from 1,500 revs. Something I wasn't used to. I respect them, just don't like them.

i was in a gen III taxi last weekend and the taxi driver sure did give it some. I was suprised at how hard it pulled with 4 people in the car and it was auto. It felt faster than the 6pd gen III an uncle of mine used to own.

maybe it felt faster coz i was a little intoxicated at the time.

my car only has cat back and running the 7psi sloenoid open all the time. But yeah I reckon the extra power and torque once they are underway can be seen. Off the line I just let out the clutch and floored it but to be a chance I would have had to drop it a bit. We were both equal to about 20km/h then he started to pull a bit probably about a car length to 100kays I reckon. I have a dump pipe ready to go on' date=' hopefully that will help but yeah the v8s have a bit of power these days.

Maybe I should get over it. ...[/quote

did you knwo that a v8 need only spend about 3grand to make his engine chop any gtst and some gtrs. like i said not to be underestimated[/quote']

Hey mate. you should get that 5.7 pumping pretty easily.

You do know that you can cheaply get that motor to what it was designed to do don't you? 300kw

The only difference between the SS and the GTS engine is the extractors and exhaust, throttle body + intake, and flash reprogram from holden on the ECU.

Boom 300 kw.

I reckon you'd chop most cars with that.

Well, that was my 2 cents.

my stock auto sedan is 7.2 seconds to 100km , you manual coupes should see 6s easily .

its all about the launch , you really need to exploit the weight differential on the initial launch to have a chance . with that in mind my previous mildly tune s15 was more than competent agaisnt the later v8s and the earlier ones were no problems at all .

if ur really concerned get a gtr now cheap b4 they change the laws spend a few thousand and never worry again

i got 250rwkw and i find it hard to pulll away from V8 utes... they are just soo light lol

I dont think they are that light, my dads xr6 turbo ute weighs in at about 1700 kgs. I keep up to him in my 33 quite easily but then its not a v8.

i got 250rwkw and i find it hard to pulll away from V8 utes... they are just soo light lol

You're either racing some modded utes with a fair bit of power or you can't drive. In my 140rwkw S13 I can beat GENIII SS's. In the next month or two I'll have about 220kw and I'll be slaughtering them! :headspin:

You're either racing some modded utes with a fair bit of power or you can't drive.   In my 140rwkw S13 I can beat GENIII SS's.   In the next month or two I'll have about 220kw and I'll be slaughtering them! :headspin:

hehe... I think you'll find krzysiu is being sarcastic..

You also have to know the initial cost of a late model V8 as well. For a VU SS ute your still looking for about $30k anyway. I don't think an old Falcon EB XR8 with a few mods could blitz a Skyline GTS-T & GTR.

Thats right, Just remember your comparing the r33 built roughly 93-98 (dont quote me). If you compare to the holden ford v8 of equivalent time period the im pretty sure the GTSTs and GTRs should have it on them (in stock form).

hmmm my R33 had the cams, exhaust and pod filter done to my car in terms of engine and i've had the wheels, heavy duty clutch and suspension upgraded and i haven't lost to an SS anything yet. all in the car already when i bought for 20K

i haven't got that good a gear change down the qrt but still pull 13.57 so wonder what a good driver could do in mine. I have lost to a couple very beefy HSVs, one was a 401kw GTS.

I've smoked a XR6 turbo aswell and wheels mag says that only does 14.2 down the qrt.

but yeah traction is the main thing on a street drag, but you are lanuching your car near its power range aren't you????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...