Jump to content
SAU Community

Recommended Posts

I've asked about it from a few tuners and all have reported to just leave it and dont change it

Ive connected a Wideband A/F guage and if i give it medium throttle, it richens up to say high 11's and then goes to mid to high 12's once your on the throttle and the accelearting enrichment has gone. This is only on medium throttle with very little boost. I played with it and now im in the 12's and ive noticed an improvement in throttle response. '

I'll do some more testing and leet you know how i go.

  • 2 weeks later...

expanded on bad idle problems (how to correctbad idle / cranking / starting problem)

added evo8 support (harness part #)

added eccs wiring howto (bugfix to correct memory save problem)

added dialing in larger injectors

added authors notes

Has anyone tried playing with the Accelerating Enrichment program on the Power FC?

Here's some info I posted elsewhere in a Datalogit context.

The "Inj vs Accel TPS1" area of the 'settings 2' tab affects the

linearity of the Accelerate Injector settings. You don't want 100%

of 'accelerator pump' settings to kick in when you just apply, say,

a 25% change in throttle position. Nor do you necessarily want 25%

of the extra fuel. The 'input' field is throttle position in units

out of 256. (128 = 50% throttle) The 'setting' field is the fraction

of Accelerate Injector setting out of 256 that will be applied give

the partial throttle increase. There are three 'linearity'

adjustment points, but be aware that there are two more fixed ones.

(0,0 and 256,256)

I've found that I need to set the first 'Input' box to a pretty low

TP number (5/256) and give it a fair shot of fuel (175/256) to avoid

leaning out under modest throttle increases. The PFC linearly

interpolates between these points, so for throttle positions between

the linearity adjustment points, you'll get a smooth transition.

Hope this helps,

Dan

corrected powerfc dongle information

added INJ guesstimation for lambda

added airflow precentage correction map scaling

added updated datalogit version

added missing eccs image

hey i just went through and wrote every single bit of inforamtion down from my pfc, the ign and inj maps and other thibngs like the water temp screens etc etc..... took me a bit, am i right to reset the pfc and reload those valuse what do i need to be careful of (its just when they tuner put my pfc in he didnt do the idle learn thing with the a/c etc so my idle hunts)

  • 3 weeks later...

added repairing powerfc notes

expanded on airtemp support

added knocking explantion with likely causes

added advanced knock debug

added datalogit AFR plot

added rb20 vs rb25 pinouts

added r33 sensor SW check page

added R32 sensor SW Check page

expaned on hybrid version support

- differences between RB20 and RB25 looms

- support matrix for features

There's an error in the FAQ. The R33 BCK is 3 pin for the MAP sensor harness to PFC, and the solenoid harness plugs straight into the harness for the oem solenoid.

You can control boost using the oem solenoid with the BCK MAP sensor (I tried this) but the control is awful, as you'd expect from a 2 port solenoid.

Hey guys,

Great thread!

I have a question.

On the old Nissan ECU, starting the engine was no problem at all. Sounded like 2 cranks and she lit up every time.

With the Power FC after, a full tune by the Hitman and the 30 min warm up idle setting, it takes about 8-10 cranks to start.

It starts every time, don't get me wrong.

Just thought it strange the standard Nissan did it better than the Power FC

Any settings i could be looking at?

Thanks

Birnie

  • 2 weeks later...

Chris (png_gozilla) please see here ->

http://www.skylinesaustralia.com/forums/in...howtopic=127769

I moved your post so youll get a better answer in that section

hi, I've actually bought a used FC that has been in a car and tuned to 230rwkw with stock everything except cat back 3" exhaust. I have a full engine rebuild with ARC air box. full 3" to 3.5" exhaust will it be ok to plug it straight up or too much of a risk???

Also, i have an AVCR installed but never turned on, can i just use that boost kit and harness for the FC??? Or get it tuned straight away???

Just wanna be sure before i do anything??

Cheers in advance..

Edited by ib6ub9

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...