Jump to content
SAU Community

Recommended Posts

Hi, can anyone here clarify the rules about having an after market gear knob? I heard that for it to be legal, there must be a H Pattern on the Gear Knob.

But what if I have a H Pattern Sticker nearby? Will this count?

I read somewhere that it is ok in NSW but how about over here in VIC? Anyone knows?

Link to comment
https://www.sau.com.au/forums/topic/64227-laws-on-aftermarket-gear-knob/
Share on other sites

I've had my car RWCd several times, and it's fitted with an aftermarket gear knob that doesn't have the pattern etched on it. I've never had comment from the RWC guys that it's a problem.

Frankly, anyone who needs the gear pattern etched onto the gear knob to know where the gears are doesn't deserve to be driving, period, let alone driving a manual.

I believe that a few people here have been defected for not having the shift pattern on the knob. I dont know about having the sticker near it though.

Also, as many people know, what a cop defects you for and what the RWC guys say are totally different.

Does anyone sell these stickers? Thats just a stupid law.. as if you wouldn't know the direction of 1st, 2nd, 3rd and the rest of them

Its based on the idea that if there is a life threatening emergency and someone needs to use your vehicle, they need to know which gears are where. The reverse gear is not always in the same place

lol well thats definately the bush mechanics way to do it :)

maybe even just texter it on ya dash haha

just go to a printing joint and get one made... maybe i could get my uncle and aunty to make a heap up.

pen, paper, sticky tape...Problem goes away.

this is a good cheap fix

one of the excuses i recieved a defect was because my gearknob had no H pattern.

to fix it i just got someone to cut out a vinyl sticker with what i needed and its all done :)

stuck it just next to the ashtray

yeah, my bro's golf you have to push the gear knob DOWN, and then push it up to left, LEFT of where 1st gear is... something like that wouldn't be too easier to figure out if there was no pattern.

The other day i had to drive a Barina (don't ask), and the stupid thing had it so you had to pull up on the friggin gear boot to put in reverse! Now there was no pattern for *that* on the gearknob! Took me friggin ages to work it out.. stupid as.. damn girl cars are crap..

yeah, euro cars have the reverse on the left. it's a pain in the ass. It's also wierd, with indicators on wrong side, coz when you come to a corner, you use left hand for indicators, then have to shift down with same hand, just annoying.

they are definantly defectable, a friend has a nismo sticker nearby, im not sure where u get them, but they r definantly avaliable

i love the M3 gear knob which illuminates the H pattern at night time... that's cool :D

but yeah, don't go blowing stupid amounts of money on "Nismo" patterns, just gank the logo from somewhere, print the f*cker out with an H pattern, or just do the whole thing with pen and paper.... don't think it's worth spending lots of $ on...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...