Jump to content
SAU Community

Recommended Posts

yep they stole my farking gear knob. was such a bitch driving the car back from the holding yard without a gear knob. oh well, as always it could have been worse :D

charlie has had a nightmare in bonded storage.

my car is as stock as they come. they can steal my factory gear knob if they really want it that bad, ive got a nismo 1 on the way from japan.

im expecting the headunit and screen to be stolen (even though its almost completely useless in australia) , but i dont care as long as they dont break it when taking it out

my turbo timer will probably be gone.

as long as they dont take my factory option momo wheel ill be happy!

Well, my theft problems could have occurred anywhere from the Brisbane docks to the Sydney bond storage place it sat in for a few months.

But it's all good now.

If anyone is worried about having any goodies stolen, have them removed and sent via EMS to Aus.

Unfortunately not. The wharfies will blame the shipping company and vise versa. You'll end playing a game of tennis with them...

We had a VERY heavily modified R34 GTR sent back to Japan and the shipping company f**ked around and told us the car would sit in Brisbane for a week as the boat that was meant to go to Yokohama was actually going to Hong Kong. We didn't get much sleep that week :D Thankfully nothing happened to it otherwise it would have been a rather expensive re-imbursement bill to the owner.

I assume your car has already been sent??? if not do what NXTIME suggested and have your broker remove all "stealable items" (Gear knob, headunit, turbo timer, boost controller, gauges etc...) from the car and have them sent to your home via EMS.

It's a real detriment to the import industry unfortunately however until AAT take control of all docks this kind of thing will continue...

This is a good idea! I imported 2 cars (GTR 1st then sedan 2nd) a little while ago now but still have all the pics. Phil from Direct Imported found both of my cars for me and was very happy with his work. Both my cars came in through Brisbane ports without a drama, nothing went missing.

Anyway the GTR 1st

Auction pics, Grade 4.5

184196Vspec1.jpg

184196Vspec21.jpg

Pics in Japan waiting to board the ship

BCNR33_-_.jpg

BCNR33_.jpg

Just off the boat and delivered to the RAWS workshop

Resize_of_2004-02-24_009.JPG

Resize_of_2004-02-24_010.JPG

Just drove the car home and parked it in the garage, couldn't wait to change the wheels :D

1841D1000027.JPG

1841D1000043.JPG

And the car now 1yr 9months later and I still can't wipe the smile off my face

Resize_of_AutoSalon_2005_-_002.jpg

And the series 2 Sedan

Auction pics, Grade 3.5, on a tight budjet this time was a little worried about the quality of the car. And its pretty difficult to find a turbo sedan in manual.

8002351309F_2_.jpg

8002351309R_1_.jpg

Off the boat, just delivered to the RAWS workshop

18412004-08-06_005.JPG

18412004-08-06_007.JPG

18412004-08-06_004.JPG

At home swapping my good bits across

Resize_of_2004-09-16_002.JPG

After the first trip to my mates panel shop

2004-11-05_003.JPG

2004-11-05_001.JPG

And the finished product, took a little more work as the body needed some little cosmetics, but interior is perfect and mechanically it was also perfect just the paint was a little average. Very happy with the result :D

Resize_of_2004-11-05_007.JPG

1841Resize_of_2004-12-13_001.JPG

1841Resize_of_2004-12-13_016.JPG

you dont need that lip on a sedan, ill take it off your hands :)

good move changing the front bar lights to the coupe version too

Haha, the lip stays. I was actually told by the compliance guy that the fog light/indicator assembly had to be changed to the coupe version as the sedan ones weren't ADR approved :D Didn't really need the extra $450 cost at the time but in the end I am glad they were changed too.

Unfortunately not. The wharfies will blame the shipping company and vise versa. You'll end playing a game of tennis with them...

We had a VERY heavily modified R34 GTR sent back to Japan and the shipping company f**ked around and told us the car would sit in Brisbane for a week as the boat that was meant to go to Yokohama was actually going to Hong Kong. We didn't get much sleep that week :D Thankfully nothing happened to it otherwise it would have been a rather expensive re-imbursement bill to the owner.

I assume your car has already been sent??? if not do what NXTIME suggested and have your broker remove all "stealable items" (Gear knob, headunit, turbo timer, boost controller, gauges etc...) from the car and have them sent to your home via EMS.

It's a real detriment to the import industry unfortunately however until AAT take control of all docks this kind of thing will continue...

thanx mate for the info. all i can do now is wait and see. hopefully it turns out all right. a turbo time wont cost much any way. :P

ok... shes finally here... arrived last night on the back of a truck out the front of my house :P

Bodys actually not as rough as i originally thought it was, altho somewhere along the trip they ripped the front bar off, massive crack in the bottom lip, mounting hole is ripped through... nothing i cant fix and reinforce myself. Final Konnexion is the name on the inside of the front bar so i assume thats the make.

Other slight issues... like Beer Baron the kents stole my gearnob!! 1st time thats happened... every import ive brought into the country has had the exact same gear knob and this time they decided they liked it... they also stole my super dooper cup holders... once again all my cars came with em and this is the first time they stole them.. f*kers.

Bride seat is a genuine one... i thought it would be a knock off... needs to be repaired on the door side... is obviously made for small asian asses cause even my frame barely squeezes in... it comes with a 4 point harness SCROTH, but for some reason there is no rear mounting belt. Passenger seat has to go... dodgey faded recliner... will replace with a Bride Ergo copy i think.

SO... now the fun begins... ive got 4 Advan tyres which i will use for drift practice now which is handy... will get some cheap arse second handers for compliance me thinks. Took it for a bit of a blat last night which wasnt easy without the gearnob.... mechanically seems to be in top condition despite the dirt and roughness. Will take it down the factory and begin on the body repair and paint and start doing the easy compliance stuff before getting it done properly.

post-414-1134516588.jpg

post-414-1134516656.jpg

post-414-1134516698.jpg

post-414-1134516726.jpg

not the cup holders!??? NNNNNNOOOOOOOOOOOOOOO...

looks good mate, year it's a bitch driving with no gear knob! bastards. there must be some knob head (literally) in brisbane with a shanty made out of peoples gear knobs...

hahaha maybe he needed a new support beam to hold the roof up... id imagine that many gearknobs would need a steardy beam to hold it up.

about the only thing they didnt steal was the silencer for the exhaust... why ud want to steal it is beyond me but u never know with these tools.

that front bar looks like its sitting a bit low in the 2nd pic nark :D

hehe congrats.

only thing they stole out of mine was the front mats. left the rears, left the headunit, screen, momo wheel (thank the son of rajab!) turbo timer, and i even got my flare :(

baron, i got a drink holder for ya too :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...