Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Wow, Initial D is right.... I thought it was just a cartoon. :confused: :(.

hah i must say im a initial d fan takumi is my hero haha na but really love watching the cartoon.

i dont reckon im co ordinated enough to brake with left while my right is just sitting there i wouldnt be able to do it i dont think. i spose ive never tried plus my cars manual and ive always used my right foot

theres not really much point using 2 feet, unless you need to stall it up for a quick take off...

I wouldnt get into the habit of left foot braking cos when u switch to manual u'll poo it up

ur mate sounds like a ricer if he thinks its gonna make a big difference

someone mentioned emergency braking and putting down both feet was dangerous etc, but i know when driving a manual and say a cat darts out in front my me i tend to brake+clutch at the same time for that split second.. if someone is left foot braking what would happen if they have the same habit as me and brake+accel? that wouldnt be too good..

im a right foot braker, even in autos, even when parking (autos usually roll forward themsevles quick enough for parking even without acceleration.. whats yer hurry !? :))..

shaun.

it would be more dangerous.................you wouldnt need it in day to day driving, it's a bad habit...........you dont really need to go 0.01sec faster then the other guy at the lights.

the first time i hopped into a car to drive i put the left foot on the brake out of habit from playing to much Datoyna USA.

if you took up rally or something though thats a different story.......

ive been left foot brakin since i was 17 cause i used to drive an XF and idle was really shitty so  i had to do it to keep the revs up.  havent stopped since especially now that i drive manual cause my left foot needs to be doing something.  im quite proud that i can brake smoothly with my left foot but ii find it bloody unco braking with the right foot driving an auto which is wierd cause thats what you noramally do in a manual anyways....strange.

ah yes its a dying art that only few of us ever practiced :)

As well left foot braking is almost mandatory to go fast in a rally car. It's a skill. Greg is just too old to get rid of bad habits :)
I certainly use it in competition to stabilise the car through corners. But I thought this thread was about driving around town - that's why I made the comment I did.

Anyone who uses the "it gives me a poofteenth of a second reaction time advantage" excuse is STILL driving too close to the car in front, and isn't reading the traffic correctly.

Little bit scared of people who use left foot braking in a manual.. What the hell is controlling the clutch?

When it really comes down to it, you dont need the clutch to change gears except in and out of first.

But I meant in corners where you do not have to change gears. Of course if you get it wrong and have to come to a complete halt you will stall every time. Motorkhana is a great example, as long as you don;t have to come to a complete halt you do not need the clutch foot at all.

And of course it makes a hge difference on the track if you are trying to deal with understeer, or are on a track with long sweeping corners

they way i look at it... manual cars allow u to use engine braking and gear selection to help balance the car when your cornering. in auto cars you loose this ability, gears can change mid corner and unload the chassy. i use left foot braking to negate this, but thats only if im driving in the hills for example (not speeding just making the car balanced through the corner)

in city driving, no point using left foot so i dont, and only brake with my right (if i happen to be driving an auto)

Little bit scared of people who use left foot braking in a manual.. What the hell is controlling the clutch? Or do you coast in "angel gear" (neautral)... Thats twice as dangerous as having +1 second reaction time IMHO.

Um your left foot is controlling the clutch! It is possible to shift without the clutch if necessary on the track of course doubt you would bother in everyday driving but sometimes it livens up an otherwise boring drive!!

No clutch for changing gears... hmmmm.... I m yet to practice that. I tried with limited success switching between 3rd and 4th and it seemed pretty hard.

its easy if you time it right, not sure if this has been mentioned allready but you can downshift without the clutch aswell as upshifting, its a bit harder tho, you really have to know the correct rpm your trying to change to for that gear and speed

its easy if you time it right, not sure if this has been mentioned allready but you can downshift without the clutch aswell as upshifting, its a bit harder tho, you really have to know the correct rpm your trying to change to for that gear and speed

Well it's the upshifting that I can't get right. I've been double-clutching all my manual driving life, so i can do the no clutch downshift alright-ish. Now that I am thinking about it... by the same token when upshifting, you need to take it out of the lower gear, wait for the engine to come down to the correct rpm for the higher gear and stick it in... Might try that "at home".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...