Jump to content
SAU Community

Recommended Posts

umm the gtst realistcly would do in the 16s, lets not kid our selfs

i owned a R33 GTS-T with a mad exhaust, runnin 12psi boost and it only ran into the high 15's low 16's...

a 32 is only 2.0l as well, so it would run high 16's

either your 33 was running like shat, or you cant drive.

or maybe your exhaust wasnt MAD enough.

ive seen 33's with FULLY SICK exhausts and 12 MEGA psi running 14's

I have never seen a turbo Skyline run higher than a mid 15, stock or modded.

A stock SR20 Pulsar from the early to mid '90s run 16.2. Hell, even a stock base model BA Falcon 4L auto is supposed to run 16 flat or better

.

the common misconception is a 'stock' car...

has anyone ever seen a DEAD STOCK r32 down at the drags?

...most people often call a car with just a 3" exhaust a 'stock' car

i mean stock exhaust, muffler, cat, air filter, boost, fuel... EVERYTHING

the kind of person who takes their car to the drags is the same kind of person who will modify it

i tend to think that i DEAD STOCK r32 gtst with a normal driver would run a 16...

Waz.

Well heres my 2 cents

I have an R31 Skyline with an RB30E in it and the thing was stock as they come and ran high 16's. I added extractors and exhaust and got low high 15's, low 16's. Now I don’t know where every one is getting there information that R32 Skylines stock would run 16's, but my stock R32 seems to be a hell of a lot faster then my R31 and it has been completely stock till about 2 days ago when I added a pod and all that did was make it sound good no noticeable performance. I think people should check there numbers before posting that R32's run 16's.

Just because you have an engine that’s about to die or a bigger engine then a 2.0L and your car is slow, don’t mean the majority of stock R32's are slower then you :kick:

i mean stock exhaust, muffler, cat, air filter, boost, fuel... EVERYTHING

the kind of person who takes their car to the drags is the same kind of person who will modify it

Gimme $50 and i'll go take mine out there and see how slow mine can run :rofl:.. it's auto which would make it even better. oh but its got a K&N filter so i guess it's too highly modified :)

Go on, we will pass the colleciton hat around:)

My stock R32 ran a 13.4 @ 108mph. Gtr and R33 owners call their internally std engines stock, well so am i:)

If you cant run a 15.5 in any std manual id be scratchign my head. I have been in an R32m which other then a air filter is completely std. Im betting it woudl get into the high 14s pretty easily, where is 46n2 when you need him:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...