Jump to content
SAU Community

Recommended Posts

Ok.

The next Round of the WRX Club and also SAU Vic Club Championship is at Winton Raceway on Saturday April 16.

Entry forms available here:

http://www.wrx.com.au/motorsport/forms/Win...160405entry.doc

Sup Req's

http://www.wrx.com.au/motorsport/forms/Win...0405supregs.doc

Cost to Enter: $110.

Driver Training Only: $100 (non timed).

Winton is the best "learning" track on the Vic circuit as there is basically very little to hit and damage a car with, the overall speeds are quite low (most won't get over 200km/hr) and there are minimal gear changes per lap (I usually do 4 a lap!). This leaves you to heaps of time to concentrate on lines and braking points.

It's the perfect track to try and find your limit. You find spins and off track excursions are common here!

It's also the home Track of Team Wang Racing! :(

Some people may be interested to make a long weekend of it as Fridays are open for free practise. $100 for Fridays and you get 20mins of track time every hour. CAMS licences are NOT required for the Friday practise nor things like fire extinguishers etc, so if some people are going to do it and you have been thinking about joining track days but haven't been sure if it's for you then these open Fridays are a perfect chance to give it a shot.

:cheers:

Link to comment
https://www.sau.com.au/forums/topic/67565-wrx-club-rnd-3-winton-april-16/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Also - I will quickly point out - I know there are the carrot's of Maserati Club @ Sandown and PIARC @ PI the week before and if you are thinking of missing this round and doing one of those due to costs - this will be the last "SAU Vic Club Championship Round" until mid June.

We are not doing the Hill Climb at Morwell in May as part of the Club Championship.

Because the track surface is not up to grade IMO. People can still run there if they wish but SAUVic's stance is that we won't be encouraging people to do so for safety reasons.

Surely you saw the result of Chris's car. Yes it was a drift day and he was a spanner - but in a hill climb you are actually trying to push faster and it's just too dodgy.

Just cause you won go-karting doesn't make you a hero.......

:jk:

I was going to look at attending this round as a flaggy so as I said if people wanted to go to it then thats fine.

BUT - thats the Hill Climb. This threads about WINTON. Lets worry about Morwell when the time comes.

:)

  • 2 weeks later...

Ok - this is just over 2 weeks away now so we are going to book some accommodation in Wang for those that want it by the end of the week. Due to getting burnt at PI with accom we need people who are coming to confirm this week or else you can look after yourself.

There is the option of comming up just for Friday night or else staying on for Sat night as well. If you want accom please state your intensions on this matter. Remember it is a 3hr drive from Melb but only a 20min drive from Wang to Winton. From memory the rooms are about $150 per night and sleep 6 so thats less than $30 per night. It needs to confirmed however.

So far I know confirmed for accom are:

Snowman (Fri + Sat)

Bec (Fri + Sat)

Scotman (+1 ?) (Fri + Sat)

Chrisman (Fri + Sat)

Blaise + 1 (Fri)

:rofl:

ACCOMMOADTION THREAD - http://www.skylinesaustralia.com/forums/sh...751#post1273751

Please DO NOT post your accommodation requirements here - as the event gets closer this thread will get messy - goto the Accommodation Thread (above link) and let me know there.

Thanks

  • 2 weeks later...

Oh, 25 places left.

Scott, or anyone else ... will you be goign to Race Brakes at all this week? Im in Sydney and Adelaide and need new front and rear pads, Sandown all but ate what pad was left.

...oh and one more thing that will guarantee i come...has ayone got a good digi cam that i can put in my car for a few of the sessions?

im full of questions tonight..Chris, Scott, Ferni, Jack....any others coming. I know Archie is keen:)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...