Jump to content
SAU Community

Recommended Posts

  • Replies 172
  • Created
  • Last Reply

Top Posters In This Topic

Still out there somewhere. Usually about 5 days before they land I get a notice of arrival. I still haven't got it yet.. If I don't get any confirmation before the 10th I will look deeper into it. Such as ask the shipping company how things are going?

How good are these kits compared to all the others that i see around the traps? Im after a good quality kit that i can bolt onto my R32 GTS-t with minimal fuss and modifications but know that it will do the job and not last few a few months then give me grief.

can you match the prices offered by the guys on Nissan Silvia? The same spec ones from the same manufacturers are being sold for $180 and $150 by two different traders.

can you match the prices offered by the guys on Nissan Silvia? The same spec ones from the same manufacturers are being sold for $180 and $150 by two different traders.

These prices are for the intercoolers. I believe in healthy competition, but what's going on in ns.com, I think it's too bizarre.

Well here is one statement he on the add.

Pressure Drop: 20PSI - 17PSI .. What the? nice pressure drop over the cooler.

same manufacturer I doubt it. What gives you that idea?

There is cheap and there is too cheap! I have cheap but I don't sell parts that will fall apart in 3 months. I would watch out buying coolers at $150... Have you read the stories about the coolers whistling. Those really cheap cooler may well be the ones and the manufacturers are trying to get rid of their stock. Maybe, I'm just speculating why they are so cheap. Or maybe they are defects.

But so far I have had 100% happiness from my customers, no faults found, no whistles and no returns. Sorry, I can't match their prices impossible!! But my assumption would be my coolers are of better quality from my feedbacks so far.

Maybe some of the guys who have received the blue kits and coolers can give some feedback.  :cheers:

Yeah that would be good to hear from others that have them???

would be good to know if the horns and temprature sensor need to be relocated and where they put them, also how the top plumbing fits between the top radiator hose and fan (R32 related).

cheers

Okay guys.. .Here's what you've been waiting for.. feedback

Started the install on a mates gti-r on Saturday and still going.

The piping is very good quality and no complaints there, all the associated brackets are in the right places and everything was provided. I was dissapointed with the clamps which kept on falling apart and were out of shape, also the piping for the gti-r went too close to the Pod (about 100mm too close) and now the pod has to be changed and/or relocated. Would of been worse with stock air box.

Anywayz.. overall the kit is good, the kit fits great, great quality piping just needs to improve on the quality of the clamps. Apart from that great kit :) (would be good if the piping didnt go directly where the air box goes though.

Thanks mate.

Greg

I have just fitted the intercooler to my car and all looks great. I have one questions thou there is a red rubber line with a T piece and I have no idea where it goes can anyone tell me as I'm no mechanic and one line I pulled off the intercooler ???

thanks

SirSkyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
×
×
  • Create New...