Jump to content
SAU Community

Recommended Posts

  • Replies 317
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

The radio itself still works fine....what we do is use the switches on the dash near the steering wheel for the controller instead, so they no longer control the radio.

But you always have the option of a seperate switch and keeping the dash radio controls for the radio....if you ever use them :)

  • 2 weeks later...

Just wanted to say thanks Duncan with the install and Mark for making the unit.

Finally had a chance to play with it and definately makes a difference and just have to work out the setting best suited for me. Good work guys.

Hi Andrew, I've just emailed the details across to you :)

For everyone else interested, there are currently 3 available so we can get them sent out pretty much straight away D:

  • 2 weeks later...
Hi Andrew, I've just emailed the details across to you :)

For everyone else interested, there are currently 3 available so we can get them sent out pretty much straight away D:

Hi, I'm interested. I would like to fit one to a R32 gtr. Please contact me

Thanks

I saw what the extra plates in the centre do on Snowies car, and while good for track, not good for tight stuff so this is a better solution for all 'round. I'll grab one after I recover from surgery in a month or so. No sense depriving the needy when I can barely drive :)

Actually I'm pretty sure that R32GTS4 is the first to try one on a gts4, but I am 99.9999% sure it will be fine as it uses the same system.

There is 1 available from the current batch or you can see how he goes and grab one later :cheers: You will love it :)

  • 2 weeks later...

Just a quick update to the manual for everyone that has bought one of these.

There are actually 2 RWD modes on the controller, not one as the manual states.

1) Hold the down button down for 5 sec and it goes into "almost-rwd". There will be basically no front torque except under extreme conditions, but your ABS will still work and there will be no ATESSA warning light

2) Hold the up button for 5 sec to put the car in full RWD mode, this will also stop ABS working and the ATESSA light comes on, but there will be no front torque at all. This mode is the same as pulling the 4wd fuse.

  • 2 weeks later...

Hey Geoff yes all the RWD only mode will work on all ATESSA systems....but it doesn't change how the 33 and 34 systems work and so you might damage them using the RWD only mode. So my recommendation is only use the RWD mode in a 32....unless someone wants to test it out for me lol

It could be ok given the clutch pack nature of the transmission system. My take is the 33/34s have more preload initially but don't know if that is electronically controlled or a physical relationship. Certainly some of the Jap controllers allow for full RWD on these models unless I've crossed some lines somewhere.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...