Jump to content
SAU Community

Recommended Posts

Well it was time for my r33 to get its gear box and diff oil changed. Looking around on the forum I read redline was a good brand. But when I looked at the price I thought twice. $130 to change my oil!!! #$%#$ But I also read on the container it has 400 000 klm before you have to change it again. mmmm!!

Ok well the fact that I will never have to change the oil again and the container did say racing use :P my arm was twisted..

So into the garage I went, changed the oil, and took here for a drive. I noticed the gear changing were a little smoother but apart from that not much else.

later that night.. I went down the cost and dragged 4 cars. Ok now I noticed the oil come into play. I could flat shift this baby like the gear box was mean't for it. I also notice my schro mesh problems in 2nd was gone!! Never again since has my gear box felt crunchy.

FYI: I used castrol vm 80/90(castol something) previously..

Link to comment
https://www.sau.com.au/forums/topic/69746-changed-oil-to-redline/
Share on other sites

I have some redline gear oil ready to go in too at the moment. How much did you use? I brought 2 US gallons of it (about 7.4 lts) to do the gear box and diff. I have read numerous posts and there seems to be a conflict of gear box oil quantities. I have seen the range from 2.5 lts to 3.5lts.

yeah red line is awesome.. i had a problem with my clutch on my S15. everytime i drop gears and slowly release my foot off the clutch, it would vibrate ALOT!! I put redline gear box fluid in and some TEFLON gearbox treatment, and after 400kms never happened aggain and gears feel way smoother too!!

Rob

I bought the shock proof 4L 85/90 I think (I let the saleman work it out for me) for the gearbox and the 75/140 1L for the diff. I used all the 1L plus a little of gear box oil. I think the diff took about 1.5L and the gearbox about 2.5L.

I used just over 4l in my gearbox..

LW.

I just double checked, and the R32 GT-R workshop manual says you need 4.1l (for the R32 GT-R gearbox, obviously). Given that the R33 GTS-t gearbox is meant to be quite similar to the R32 GT-R box, I find it suprising that some of you guys have put so little oil in?

LW.

Given that the R33 GTS-t gearbox is meant to be quite similar to the R32 GT-R box, I find it suprising that some of you guys have put so little oil in?  

LW.

Thats what i thought too, but the guy who told me that 2.5L was all that was needed was a tranmission specialist. He said as long as the gears are picking up oil the trans will be fine and that too much oil will overheat it.

I also changed my gearbox oil to Redline after my car wasn't engaging 1st gear very well on down change (FJ20 Box). It needed about 2.2L and after about 500km it worked its magic. Gear changes are now smoother and not at notchy and it engages all gears perfect.

I've also heard this works wonders on Toyota boxes as they are known to be notchy and stiff.

it has worked well on my previous r33, i recently put it in my new one, but as benm says it takes around 500kms to make a big difference but so far its already better(only driven maybe 100km)

gbox took about 2.8L, i just fill it till it reaches the hole..

diff took 1.3L, didnt use redline, used castrol, heavier weight.

it has worked well on my previous r33, i recently put it in my new one, but as benm says it takes around 500kms to make a big difference but so far its already better(only driven maybe 100km)  

gbox took about 2.8L, i just fill it till it reaches the hole..

diff took 1.3L, didnt use redline, used castrol, heavier weight.

where can i get some redline oil for my baby???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the re003s’ on my 06 XT Forester Turbo and I highly rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...