Jump to content
SAU Community

Recommended Posts

Hi Everyone,

Got pulled over by cops today .. I wasn't speeding.

Apparently my car is under 100mm (which is the required legal height) but only when I am in the car .. yah Im 90kg but still.

Also he mentioned that my POD Filters dont meet ADR Compliance Rules or something like that.

So just wondering what I need to do as I have stock VSPEC Suspension. Can I raise it a few mm? Is that a small or big job?

Also with the Pod Filters, Do I need a Box covering it? Will that make it legal?

Any info will be great thanks.

PS: He let me off with a warning but I like to comply with the rules where I can.

Link to comment
https://www.sau.com.au/forums/topic/70842-quick-question-on-road-worthy/
Share on other sites

Get it engineered - as far as I know the 100mm is not measured with anyone in the car.

As far as I'm aware technically any mod you do on your car needs engineering, including the air filter. A box won't make it legal-er it will just hide it.

I have my non-oiled pod engineered with no box - so the "so long as it's in a box it's legal" is an old wives tale, atleast in NSW.

Good luck.

under 100mm with stock vspec suspension? I was under the impression that an R33 GTR Vspec had 135mm ground clearance, and a non vspec had 145mm ground clearance.

have you measured it yourself? I can't imagine your car would have droped 30-40mm over the years?

I live in NSW, but bcoz u live in Vic, maybe u can check this out: http://www.vicroads.vic.gov.au/vrne/vrnav....A256ED10015E72B ,and u can also do more search about "Vehicle Standards Information"s there on the vicroads website. As far as I know for the pod filters, lot of people've already got defected from pod filters.., and like someonestolecc, I don't think covering the box will make it legal. So after all, engineer and engineer certification seems to be the best way.. Gud luck with your job.. :D

Get it engineered - as far as I know the 100mm is not measured with anyone in the car.

As far as I'm aware technically any mod you do on your car needs engineering, including the air filter. A box won't make it legal-er it will just hide it.

I have my non-oiled pod engineered with no box - so the "so long as it's in a box it's legal" is an old wives tale, atleast in NSW.

Good luck.

so how much would it cost to get a pod filter engineered ? can the dealer u brought the car off engineer it for u ? (assuming they're a raw compliance workshop)

under 100mm with stock vspec suspension? I was under the impression that an R33 GTR Vspec had 135mm ground clearance, and a non vspec had 145mm ground clearance.

have you measured it yourself? I can't imagine your car would have droped 30-40mm over the years?

You probably find that he has a bigger exhaust and it hangs down .

The 100 mm minimum hight is when fully loaded !!!

Pod filters do not need to be boxed.

Vic EPA laws state that you are only permitted one intake modification. (explained below)

If you have an aftermarket intercooler, you must run the standard air box to comply with EPA laws.

262EPAstuff.jpg

Thanks for the info Sky031.

So from what you stated mine should be okay as my intercooler is stock?

R31Nismoid: Yah it drops 2mm when I am in the car. It is stock VSpec Suspension.

It can be argued but I rather know that I have everything correct and complying with whatever standards. But the police officer was being a bit picky as I am sure there are far worst cars than mine :)

if you have the compliance cert, and the engineers, they you wont have a problem.

i was in court over a similar thing. Car was designed a certain way and complied, then an officer deemed it not too be legal, when in fact it was due to the vehicle's design :)

I thought it was 100mm unladen? If not, what is deemed as fully laden, 4 passengers plus luggage? I am sure when mine was attempting compliance it was 100mm unladen though the compliance guy told me and he was to the letter.

Brandon: My air pods are not boxed and not a problem as they are the single intake mod as mentioned by Karina.

From my numerous encounters with Prahran Police - they aren't always aware a GTR has a FMIC as standard equipment, and so pick it up as 2x mods - as a GTSt would be, hence the confusion.

Filter doesn't need to be boxed.

However, in the interest of keeping heat away from the intake, it makes sense to at least have some sort of division between the pod and the rest of the motor.

(No law that says pod filters need to be boxed)

James I will keep that in mind thanks.

How does one get a Engineers Cert?

And Does anyone have the link handy where I can print out these rules .. going to study these rules further.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...