Jump to content
SAU Community

Recommended Posts

Hey Fellas,

I've been creeping round while waiting for my line to arrive and hopefully it arrives real soon! If it gets on this months ship then it should be here on the 12th. Below are the pics of my baby. It's a bit dirty but a good amount of elbow grease should get it looking scmick!.

What do you guys reckon?

Also I've noticed taht in the engine bay near the back I have only 2 cables instead or the usual 4 of 5 that normal GTR's have? what are those cables and am i missing somthing? In the GTST's they have only 2 cables at the back so hopefully it's not a GTST --> GTR conversion. I think i'm being paranoid but you never know. Someone please enlighten me.

Link to comment
https://www.sau.com.au/forums/topic/72079-another-32-gtr-or-is-it/
Share on other sites

yes they do..

Either this car chose no ABS option or was removed

I thought it was standard equipment but i guess not.

looks nice but :D

Thanks! with the engine how much would it cost to get someone to professionaly detail the bay? I would do it myself but i'm afraid of breaking somthing. :Oops:

12 more days :) heheh

nOOSE

Is it a NISMO Edition GTR? I know the NISMO ones came with no rear wiper and some other slight differences, maybe they also had no ABS - because I don't think something that aids drivers would be allowed under racing rules.

---

*edit*

Actually yes, I'm sure that's it.

Here's 2 of them on Prestigemotorsport, they only have the 2 wires you mentioned. Compare them to "normal" R32 GTRs that have the 5.

Nismo 1

Nismo 2

Is it a NISMO Edition GTR?  I know the NISMO ones came with no rear wiper and some other slight differences, maybe they also had no ABS - because I don't think something that aids drivers would be allowed under racing rules.

---

*edit*

Actually yes, I'm sure that's it.

Here's 2 of them on Prestigemotorsport, they only have the 2 wires you mentioned.  Compare them to "normal" R32 GTRs that have the 5.

http://www.prestigemotorsport.com.au/au/stock/details.asp?StockID=2754]Nismo 1://http://www.prestigemotorsport.com.a...ID=2754]Nismo 1

Nismo 2

So i've got the NISMO GTR.! that sounds pretty kewl. Time to search and find out the differences.

Hey Guys,

I can't find any decent information on what are the differences between nismo and non nismo. Some say no stereo, no A/C and others say it does and blah blah. Tried googling for the past 3 hours at work no luck all speculation. Does anyone actually have an idea what the differences are? Here's a few more pictures of the car if it helps to distinguish if it's a nismo.

nOOSE

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...