Jump to content
SAU Community

GTR wins Targa Tas.

Lavers
 Share

Recommended Posts

R32Big_boy Veteran

R32Big_boy

Posted
Posted

Saw Geoff beale or beable or something, at our last sauvic meeting, his 34N1 was breath-taking. Full roll cage, quick realease steering wheel the whole nine yards. They are still stock though because of targa rules and whatnot, still amazing cars to see in real life. oh and to hear it driving through the burnley tunnel was amazing!

sav man Grand Master

sav man

Posted
Posted

Big congrats to the whites, been following them ever since they entered their mad 300zx

Only modes your allowed in the modern section of Targa is

Breaks (what ever you can fit under your wheels)

Engine ECU

-45kg (but can't remove rear seats unless they have to go to fit a roll cage)

zorst (but it can't be any bigger, just high flow cat, mufler) and that's it

more boost (standard fridge)

LUMPY Enthusiast

LUMPY

Posted
Posted
thats awesome the R34 GTR of jason and john white winnning targa congrats to them both.

finally a GTR winning targa

see the R32 GTR crash into a fence and embankment and hit the cameraman.

I havent seen the footage yet, but I have a fair idea it was the car we built/prep. Was it car 828 - Doug Walker/David Watkin? White 32 with Jet-tech, AD Engineering and Hyperdrive Signage on it?

Shit - I hope not.

LUMPY Enthusiast

LUMPY

Posted
Posted
Big congrats to the whites, been following them ever since they entered their mad 300zx

Only modes your allowed in the modern section of Targa is

Breaks (what ever you can fit under your wheels)

Engine ECU

-45kg (but can't remove rear seats unless they have to go to fit a roll cage)

zorst (but it can't be any bigger, just high flow cat, mufler) and that's it

more boost (standard fridge)

Ah, there's a bit more to it. Engine must be stock. Must run factory air box, cooler and exhaust size, although the latter can be aftermarket, just the same size as oem. No cat etc but it must have some sort of muffler. The management can be changed but only at the main connector. Everything must be as originally homologated - so the evidence first presented by the first guy to ever race a GTR at that level is the spec of the car you must run.

In the case of a 32, the rules even state what size oil cooler is permitted. With the 32, there are a couple of turbo choices too, but no bigger than Nismo 580's or 581's off the top of my head.

As you can imagine, it's damn hard to get power out of them that way. Our one makes 430hp at the wheels. Remember that sheer power isnt the goal, as the engine has to run flat out for several long days of competition.

The only freedoms in the class are saftey related. Brakes, cage etc. You can only strip the interior out if the cage is in the way. Ours runs Massive AP 6's front and 4's rear, that clear the inside of the homologation limited 17x8 inch wheel by no more than a business card. The cage is a full integrated welded in jobbie with bars everywhere.

R31Heaven Proficient

R31Heaven

Posted
Posted

The White team began the final day in first place and held on to win six minutes clear of Greg Garwood and John Allen in a turbo Porsche 911.

Jim Richards and Barry Oliver in a Porsche GT3 CS were another 13 minutes further back in third place, well ahead of the rest of the field who were more than nine hours behind the winners.

Top Australian golfer Stuart Appleby and co-driver Peter Burrey, driving a Lamborghini Gallardo, finished a creditable 10th.

Obviously they got the rain they were hoping for and Jimmy wasnt :)

They have always been the bridesmaid, so congratulations to them for finaly grabing the big one.

sav man Grand Master

sav man

Posted
Posted
Ah, there's a bit more to it. Engine must be stock. Must run factory air box, cooler and exhaust size, although the latter can be aftermarket, just the same size as oem. No cat etc but it must have some sort of muffler. The management can be changed but only at the main connector. Everything must be as originally homologated - so the evidence first presented by the first guy to ever race a GTR at that level is the spec of the car you must run.

In the case of a 32, the rules even state what size oil cooler is permitted. With the 32, there are a couple of turbo choices too, but no bigger than Nismo 580's or 581's off the top of my head.

As you can imagine, it's damn hard to get power out of them that way. Our one makes 430hp at the wheels. Remember that sheer power isnt the goal, as the engine has to run flat out for several long days of competition.

The only freedoms in the class are saftey related. Brakes, cage etc. You can only strip the interior out if the cage is in the way. Ours runs Massive AP 6's front and 4's rear, that clear the inside of the homologation limited 17x8 inch wheel by no more than a business card. The cage is a full integrated welded in jobbie with bars everywhere.

didn't i basicly say that (well that's what a meant anyway)

how much work is it to spec a R32 up to a N1? and can you just replace the ATTESA-ETS with ATTESA - pro to bring it upto a Vpec N1. Cause dad and I are looking to go in it next year.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


×
×
  • Create New...