Jump to content
SAU Community

Recommended Posts

F***in Sato! Baulked Webber in qualifying and MW starts 7th because of it. FIA will decide to slap a fine o Sato for it. Sato's not doing to well to retain his drive for 06. :)

But lookie here... Kimi on the front! YAY!

Edited by Silver-Arrowz
  • Replies 310
  • Created
  • Last Reply

Top Posters In This Topic

Mark Webber, Williams (7th, +1.147s):

“As with qualifying these days, we won’t really know our performance until the race but we look pretty reasonable here. Obviously BAR didn’t have any communications, or Takuma didn’t know what was happening. He did a very slow lap, then an even slower in-lap, which compromised my qualifying but that’s how it goes. That was a really important corner and it probably compromised my lap by about three tenths of a second. We’re still up there though.”

Webber is the 2nd unluckiest driver in F1 after Kimi.

wow here's some news it seems Sato has been disqualified. doesn't help webber though as even 3 hundredths of a second would have put him ahead of heidfeld. bummer.

It's a shame as Webber looked like he had decent pace for the first time in a while. He put good passes on both Red Bulls in the first few laps, although i'm sure the Red Bulls were carrying much more fuel given how far they went into the race. Would have been interesting to see how both Webber and Heidfeld went if they didn't keep having blow outs on the right rear. Definately a set up problem, but you think Williams would have got it right for race day considering the same thing happened to Webber during Saturday morning practice.

FFS, get your act together WILLIAMS!@!@!

yeah but in montoya's defence his tyres were rooted, he was just fighting to stay ahead....and made a simple mistake. Its just that it is such a tight corner that it makes it a big off.

And how bad was his luck getting smacked by the Jordan? Alonso never would have been near unless that happened :D

What a race! What a great track. How good was it to actually see F1 cars slipstreaming each other!?!? I can not wait until next years race in the sphincter of the universe where there will be less downforce and closer racing.

Webber, his luck continues...hang in there mate!

yeah that was quite a decent race. I thought the moves webber pulled on the two RBR cars were pretty nice going around the outside. his move on schumacher would have been nice too up the inside had schuweave not excecuted 'the chop' webber was even further alongside when the went into the corner but realising schuey was going to take off his nose he back out of it a tad but they still colided. I though webber giving him the finger was a nice touch...

Yeah montoya would not have had a good nights sleep after that one i think as he drove a great race until that farking jordan rear ended him, i would say after that it's likely his tyres were gooone and he would have been a bit rattled too.

Such a shame that williams cannot get their sh1t together.

Montoya said that the Jordan incident rooted the rear diffuser. The corner he lost it in was a highspeed combination of lefts and there was just no downforce. Either way if he didn't lost it, Alonso would've gotten him exiting the turns.

  • 2 weeks later...
hahaha thats about William's only chance tonight I reckon.

Not quite, good ol Pizza boy (driving for the injured Heidfeld) got in the points with a decent, but unspectacular drive last night.

As per usual, Webber lucked out! He ended up running up DC's arse in turn one after DC clipped the car in front of him which was a bit of a shame as Webber actually had very good pace through the race. Webber's drag with Sato down the pit lane was also quite entertaining. I'm sure Webber would have finished way in front of Pizzonia if he got cleanly through turn 1, so more points have gone begging. Same old story really...

Also feel sorry for Kimi...

Puts the car on pole with a very heavy fuel load

Then has to change the engine and start from 11th

Then gets stuck behind the F1 moving chicane that is JV

Then finally works his way up to 3rd after 1st round of stops

Then gets a delaminating tyre, has to pit again and drops to 12th behind JV

Then works his way up to 4th and spins as he closed in on Fisi and looses a place to Trulli

I know Webber's had his fare share of bad luck, but Kimi must have thrown a black cat through a mirror whilst standing under a ladder as the man is cursed! He's a a country mile quicker than anyone else on the grid, yet still finds himself in 2nd place in the drivers championship...poor bastard!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...