Jump to content
SAU Community

RB26 Crank

adelzx9r

By adelzx9r,
in Engines & Forced Induction

 Share

Recommended Posts

WetGTR Proficient

WetGTR

Posted
Posted

Proberly the best thing to do is ring a Nissan Dealer here in OZ, get a price and see if they would ship to you.

Don't see why they wouldn't as they ship things out all the time, have your Model No: of your car ready which is on your ID plates in the engine bay so they can identify which one would suit you and a credit card.

To find the Nissan Dealers try using www.yellowpages.com.au

Hope this helps

Link to comment
https://www.sau.com.au/forums/topic/73447-rb26-crank/#findComment-1351038
Share on other sites
lwells Grand Master

lwells

Posted
Posted
better off, if u can speak japanese, or know someone that does, call Nissan in Japan.

:werd:

Given your proximity to Japan, surely it makes more sense ordering from there...? If language is a barrier, I'm sure one of the numerous auction agents/retailers can probably help you.

LW.

Link to comment
https://www.sau.com.au/forums/topic/73447-rb26-crank/#findComment-1352522
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...