Jump to content
SAU Community

Recommended Posts

Hi as it says i have R32 GTSt interior including, seats (front and rear), door trims and rear trims. Only selling coz i bought the GTR equivelant of all and converted.

Interior items are as follows, all from R32 GTSt:

*front seats, on rails (small tear on drivers side) - $300pr SOLD

*rear seat (immaculate) - $150ono

*rear trims (the bits that are either end of the back seat, with the arm rest) - $150ono SOLD

*Front door trims - $150

Will sell whole lot for $600, you pay delivery.

ONLY REAR SEAT AND DOOR TRIMS LEFT

Head sold.

Cheers

G

Edited by geordie
Link to comment
https://www.sau.com.au/forums/topic/73804-r32-gtst-interior-rb25-head-pics/
Share on other sites

RB25 head, cams, and cam gears included - $400

Rb25 intake plenum, trottle body, injector wiring loom - $250

Rb25 Injector rail + stock regulator and stock injectors - $150ono

Package price for the above please, and can you organise delivery or would you prefer me to.

RB25 head, cams, and cam gears included - $400

Rb25 intake plenum, trottle body, injector wiring loom - $250

Rb25 Injector rail + stock regulator and stock injectors - $150ono

Package price for the above please, and can you organise delivery or would you prefer me to.

$650 plus what ever delivery will be, i suspect it may be to heavy for good old aus post, but yeah i will check out some prices for you if you like. Prolly through pack and send or someone similar.

Cheers

G

what condition are the door trims in?

how much will you do the entire rb25 set up for?  

thanks

Same price i gave funkymonkey for rb25 stuff.

As for the door trims, they are good...BUT! the cloth part has come away on the drivers side. They also have tweeters glued to them down near the grill, as you will see in the pics) if you want pics, pm your email addy.

Cheers

G

Hey where abouts in melbourne r u? Do u still have the inside air conditioner air vents if so how much will u sell them for becos i need 2 put them in my car so it can pass a road worthy can u please call me on 0413442008 catherine after 4.40pm thanks

Hey where abouts in melbourne r u? Do u still have the inside air conditioner air vents if so how much will u sell them for becos i need 2 put them in my car so it can pass a road worthy can u please call me on 0413442008 catherine after 4.40pm thanks

You havent read my post at all have you? Or my location? Its ok i wont hold it against you. Best bet if your chasing vents is to go to nissan direct. The r32 GTR was sold in australia so they can stil source parts. I last heard vents are around the 30-40 mark.

Cheers

G

geordie, price sounds good depending on freight costs, worst case scenario I'll drive up and pick it up or something with a deposit.

Can I get some high res pics of the parts I'm interested in sent to [email protected]

Cheers

geordie, price sounds good depending on freight costs, worst case scenario I'll drive up and pick it up or something with a deposit.

Can I get some high res pics of the parts I'm interested in sent to [email protected]

Cheers

Head, plenum and injector rail are about the 50kg mark all up. So definately to much for aussie post. Even split into multiple boxes the head its self is about 25kg.

Cheers

G

hey do you have the power window switch from the drivers side door?  If so wat condition and how much?

Nope only the door trim. No switches, no handles, or vents. Just door trim, rear arm rest trim, seats. These are the only difference betwen the gtr interior and the GTS..

Cheers

G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...