Jump to content
SAU Community

Recommended Posts

Hi as it says i have R32 GTSt interior including, seats (front and rear), door trims and rear trims. Only selling coz i bought the GTR equivelant of all and converted.

Interior items are as follows, all from R32 GTSt:

*front seats, on rails (small tear on drivers side) - $300pr SOLD

*rear seat (immaculate) - $150ono

*rear trims (the bits that are either end of the back seat, with the arm rest) - $150ono SOLD

*Front door trims - $150

Will sell whole lot for $600, you pay delivery.

ONLY REAR SEAT AND DOOR TRIMS LEFT

Head sold.

Cheers

G

Edited by geordie
Link to comment
https://www.sau.com.au/forums/topic/73804-r32-gtst-interior-rb25-head-pics/
Share on other sites

RB25 head, cams, and cam gears included - $400

Rb25 intake plenum, trottle body, injector wiring loom - $250

Rb25 Injector rail + stock regulator and stock injectors - $150ono

Package price for the above please, and can you organise delivery or would you prefer me to.

RB25 head, cams, and cam gears included - $400

Rb25 intake plenum, trottle body, injector wiring loom - $250

Rb25 Injector rail + stock regulator and stock injectors - $150ono

Package price for the above please, and can you organise delivery or would you prefer me to.

$650 plus what ever delivery will be, i suspect it may be to heavy for good old aus post, but yeah i will check out some prices for you if you like. Prolly through pack and send or someone similar.

Cheers

G

what condition are the door trims in?

how much will you do the entire rb25 set up for?  

thanks

Same price i gave funkymonkey for rb25 stuff.

As for the door trims, they are good...BUT! the cloth part has come away on the drivers side. They also have tweeters glued to them down near the grill, as you will see in the pics) if you want pics, pm your email addy.

Cheers

G

Hey where abouts in melbourne r u? Do u still have the inside air conditioner air vents if so how much will u sell them for becos i need 2 put them in my car so it can pass a road worthy can u please call me on 0413442008 catherine after 4.40pm thanks

Hey where abouts in melbourne r u? Do u still have the inside air conditioner air vents if so how much will u sell them for becos i need 2 put them in my car so it can pass a road worthy can u please call me on 0413442008 catherine after 4.40pm thanks

You havent read my post at all have you? Or my location? Its ok i wont hold it against you. Best bet if your chasing vents is to go to nissan direct. The r32 GTR was sold in australia so they can stil source parts. I last heard vents are around the 30-40 mark.

Cheers

G

geordie, price sounds good depending on freight costs, worst case scenario I'll drive up and pick it up or something with a deposit.

Can I get some high res pics of the parts I'm interested in sent to [email protected]

Cheers

geordie, price sounds good depending on freight costs, worst case scenario I'll drive up and pick it up or something with a deposit.

Can I get some high res pics of the parts I'm interested in sent to [email protected]

Cheers

Head, plenum and injector rail are about the 50kg mark all up. So definately to much for aussie post. Even split into multiple boxes the head its self is about 25kg.

Cheers

G

hey do you have the power window switch from the drivers side door?  If so wat condition and how much?

Nope only the door trim. No switches, no handles, or vents. Just door trim, rear arm rest trim, seats. These are the only difference betwen the gtr interior and the GTS..

Cheers

G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...