Jump to content
SAU Community

Recommended Posts

Hey all

I was just wondering how you guys go about cleaning the lenses on the headlights and how you get the lenses off. Ive taken all those little clips off and some screws but the fugger doesnt seem to wanna come off. Is there a nack with it or do you just try and lever it apart because the glue is being a pain in the a$$ to get it apart.

Any ideas?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/76786-cleaning-headlights/
Share on other sites

I get the feeling those clips only held the light together while the glue set. Some people say you have to heat it up somehow (water/hairdryer) to pull it apart slowly.

Mine are fairly old and were fairly dirty I just just autosol'led the outside and they were fine - should give that a go before you go to the trouble of taking them apart :)

You can take the front lens off but I wouldn't. Mine had a run from some sort of solvent and they were smokey/foggy looking.

I was convinced that the front was as clean as it could get and the inside must be dirty and so I took one apart (after buying a nice pair from a 4 door).

It is a big job to get one apart and is going to be a bigger job getting it back together.

I will be trying the various cutting compound type products now (watching this space for the best performer).

El Bee

u can not take the lense off, there is a way but you gotta reseal it, i bought a jap cleaner thing that makes a shit lot of difference.

If the R33 is anything like the R32 -- and I imagine it is -- its quite easy to get the front glass/lens off, but it involves breaking the sealant so you will have to reseal them.

Some people say you have to heat it up somehow (water/hairdryer) to pull it apart slowly.

A hairdryer is a very bad idea: the heat is too directional and you'll end up either not getting the area hot enough, or melting the plastic.

If you really want to pull apart your headlight, you need to..:

1) Preheat your over to 200 degrees celcius.

2) Turn the oven off.

3) Place your headlight on a rack (that hasn't been sitting in the oven).

4) Put the rack+headlight in to the over, making sure the headlight doesn't touch the sides of the oven.

5) Set a timer for 10 minutes. After 10 minutes, yank the headlight out.

6) Using a blunt bread knife, run the knife in the join between the glass and the rear of the headlight. The trick is to try and cut through the sealant, and gently work the two apart.

Lucien.

pretty sure there are a couple of old threads on this.

before trying to take em apart, i'd definately try a few methods of cleaning. i use toothpaste (sounds dumb but does the job :) ) and a heap of elbow grease and they come up well. the other thing i have done is gone to a panelbeater and got them to basically cut and polish the cover, looked brand new.

if these don't work, then try the oven trick.

I use Meguiar's "PLASTIX" clear plastic cleaner & polish... $18 at CrappyBarn!

Yep, this stuff works a treat. I thought the hazyness was on the inside but after using plastX, it seemed to only be on the outside.

If the R33 is anything like the R32 -- and I imagine it is -- its quite easy to get the front glass/lens off, but it involves breaking the sealant so you will have to reseal them.

 

A hairdryer is a very bad idea:  the heat is too directional and you'll end up either not getting the area hot enough, or melting the plastic.

If you really want to pull apart your headlight, you need to..:

1) Preheat your over to 200 degrees celcius.

2) Turn the oven off.

3) Place your headlight on a rack (that hasn't been sitting in the oven).

4) Put the rack+headlight in to the over, making sure the headlight doesn't touch the sides of the oven.

5) Set a timer for 10 minutes.  After 10 minutes, yank the headlight out.

6) Using a blunt bread knife, run the knife in the join between the glass and the rear of the headlight.  The trick is to try and cut through the sealant, and gently work the two apart.

Lucien.

on an r33 the front lens is plastic not glass so im not sure if it is a good idea.

on an r33 the front lens is plastic not glass so im not sure if it is a good idea.

The majority of an R32 headlight is plastic too. The point is not to melt the plastic -- it merely gets hot, and hence you turn the oven off and place the headlight on a cold rack -- its too soften the binding agent.

Lucien.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...