Jump to content
SAU Community

Recommended Posts

Hey all,

I am Currently Speaking with a carbon fibre Workshop,

I will be getting moulds done of the following...No fibre galss will be used Pure Carbon...

GTR R32 DASH

GTR R32 LEFT/RIGHT DOOR'S (option of Lexan/Glass/Fixed/Standard)

GTR R32 BOOTLID

GTR R32 FRONT GUARDS

GTR R32 REAR GAURDS

GTR R32 HEADLIGHT INTAKE

GTR R32 BONNET

Please get back to me on Interest And please state what part your interested in

As for prices the more we get the cheaper they are...

Cant say how much exactly but Prices will be bargain...

cheers PM preferred

What type of time frame are you looking at because I put my R32 gtr sideways into a tyre barrier at around 80kmh on sunday and wrote off the whole left side of my car. What are the wrough prices on the doors and guards.

I would be interested in getting the lexen glass for the doors not the doors themselves, I would also be interested in carbon headlight intake, carbon bootlid, and definately the dash, I will take a dash regardless of anything else!!! Are you gaugin interest to see its worth trying to get a bulk discount??? I know this stuff is expensive and I am not going to haggle on price but a rough indication would be good before I commit!!

Cheers,

Daniel.

Hey all..There seems to be alot of interest in these parts...

ATM We will be getting molds done of my gtr panels etc...Dash etc...

So i just want to ensure that people will buy the products from him so we are all happy..

Pricing will vary...Mostly go up in price but not to much prob 100-200max

THIS PRODUCTS ARE FULL CARBON....

Bonnet R32 $900

Dash r32 $600 (Not yet finalised)

Front guards $600-900 pair (Not yet finalised)

Headlight intake (Not yet finalised)

DOORS $850-1000each (Not yet finalised)

BOOTLID $500-700 (Not yet finalised)

Please let me know Judging for these pricing if you want anything..

PLEASE BE 100% SURE IF YOU WANT SOMETHING OR NOT...

cheers

I am interested in a headlight intake like the tomei ones. doesn't even have to be carbon. please let me know when you have firmed up the pricing on these.

Cheers.

Hey all...

Sorry for not being so un organised with pricing etc...

The prices i have put up are NOT the pricing for everyone..This is my new sponsor and are prices where based upon my usage...

There are more options You can get Either FULL CARBON PARTS or Fibre GLass parts for Less $$$$$

I will be getting Exact pricing either tomorrow or Friday

Cheers

Sorry for any delays

with the prices you posted up above for a guide, are they for carbon top layer?

i would be very close to purchasing a boot lid/ bonet(depending on style with vent),

and possibly doors with lexcen, but would need definate price on all first.

The prices i put up Where only for me...

You can either buy FULL CARBON PARTS cost fair bit more

Or

Fibre glass + Carbon mix which is cheaper

I will getting Prices Either tomorrow or Friday

The prices i put up Where only for me...

You can either buy FULL CARBON PARTS cost fair bit more

Or  

Fibre glass + Carbon mix which is cheaper

I will getting Prices Either tomorrow or Friday

Cheapest full front ,bonnett guards fibregalss no carbon is that an option for tight arse Minto's like me ??? thanks champ

Also be interested in the dash, though I worry a little about having a shiney finished on top of C/F: wouldn't it reflect sunlight and also have a reflection on the windscreen.

I'd also like to see some C/F aircon vents :)

LW.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...