Jump to content
SAU Community

Recommended Posts

Hi;

I have a tapping/ticking sound coming from my turbo i am unsure what it means. could it possable be shaft play (and if so what is shaft play), i also have a fear that the turbo wheel is damage as i have been getting sparks out of my exhuast.

The sound can only be hear from outside of the car, i have not noticed it well driving only when i just start her up

thankyou

Link to comment
https://www.sau.com.au/forums/topic/77167-shaft-play-and-turbo-noises/
Share on other sites

are you still making good boost or is it dead that will tell you if the exaust wheel is missing, but I am sure they just go bang not go slowly, and smoke, last thing take it to a machanic that you trust and ask them for an honest picture

are you still making good boost or is it dead that will tell you if the exaust wheel is missing, but I am sure they just go bang not go slowly, and smoke, last thing take it to a machanic that you trust and ask them for an honest picture

thanks for the reply, no smoke, and still comes on boost as hard as it did in the beging, i didnt think it would be the wheel, but something is making ticking sound from the area around the turbo

Have you checked for shaft play yet..?

If there is play chances are Blades are hitting housing.

Mine made more of a screech when bearing wore causing excessive play(on HT-18 Turbo), blades were hitting housing, snapped bits from the ends of the blades, just wore others, burn marks on blades and housing, still made boost :D

Rip off the intake pipe and hot pipes from ya turbo and free up the front inlet snout, so ya can undo that also to allow access to the compressor wheel... grab hold of the center and see if it moves forward/backward... it should have a minute amount of up and down, but forward and backward and you can safely say its ready to or is farked out. The forward/backward slack can allow the turbine to pull forward when making boost in a similar style to a propellor causes forward motion, and contacts the compressor housing which has obvious results. Get onto it asap to check for any shaftplay cos it can lead to more drama's. I dunno why you'd be getting sparks out the exhaust tho i'd be strapped to work out what would cause sparks exiting the exist? Unless it was the fibreglass packing in the mufflers breaking down and burning up ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...