Jump to content
SAU Community

Cam Gear & Dyno Tuning Results @ Croydon Racing Development


Recommended Posts

I am extremely happy, it drives like a standard GTR @ 60kmh in 5th gear (1300rpm)

2nd gear breaks traction at all 4’s on shear acceleration J

Please refer to attached graph, this is my 4 wheel dyno tune figure by CRD on the 20th June (my birthday)…

THE CAM GEAR DEBACLE…now proven!

I was there from start to finish & saw the comparable difference.

The red line (on the graph) is tuned with cam gears at 0 degrees

The blue line (on the graph) is with tuned cam gears - keep in mind I do have the poncams…what a difference!

Jim has made an additional 100Nm without sacrificing top end delivery…

This proves that adjustable cam gears do make the difference & that Jims dyno tune has made a massive difference in torque!

Only the experienced guru’s of the industry are aware of this advantage.

I also had a long discussion about road tuning with Jim – he is of the opinion that you cannot simulate ‘load tuning’

i.e. load tuning at various rpm’s for a specified time period, where can you do this on the road & how can you road tune a car under load?

At the end of the day Jim has 15 years experience with GTR tuning & the experience alone is working with all facets such as drag, targa, circuit, national teams, race production class etc….who else in Australia works alongside with top tuners in Japan & national racing teams? I guess this is why he is the busiest workshop in Australia, just have a look at the number of performance cars he has in his workshop & yard (over 30 cars).

YOU PAY FOR WHAT YOU GET – yes other tuners are cheaper but you will not reach the maximum potential if cam gears are not adjusted to suit the setup.

The way I see it, if you are prepared to spend over 10k on an engine then investing another $400 additional for a proper tune is the way to go…

Question: would you pay the small difference in tuning for an extra 100Nm of torque?

I am not here to convince you or sell CRD but I did want to share my experience with you as I am extremely happy with the outcome.

Thank you Jim ;)

Regards,

Marko

0404 884 876

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeah, I was curious about that too. my guess is boost controll. certainly a very nice number. Very sharp curve. BIG fat top end, but the bottom end seems a little dissapointing to me. I would personally like more 'area under the cruve', but i don't think that's a reflection on CRD more a turbo choice thing. Do you have a graph with Y axis in RPM instead of speed? if so could you post it up?

enjoy mate ;)

The way I see it, if you are prepared to spend over 10k on an engine then investing another $400 additional for a proper tune is the way to go…

Agreed, but you'd be a miracle worker to get Jim to tune a GTR for $400.

$500 is what he normally charges just to dial-in cam gears, let alone TUNE the GTR.

A basic GTR tune starts at $800 and rapidly increases from there.

I have never stepped foot in that workshop without being slapped with a bill LESS than $1000.

Agreed, but you'd be a miracle worker to get Jim to tune a GTR for $400.

$500 is what he normally charges just to dial-in cam gears, let alone TUNE the GTR.  

A basic GTR tune starts at $800 and rapidly increases from there.

I have never stepped foot in that workshop without being slapped with a bill LESS than $1000.

I spoke to them today they said $350-750 for a full tune :) who knows but..

Doing a power run on Saterday morning to see what this biatch is making :Pimp2:

Merli,

Im with blk180....he is saying that it is only an additional $400 or so in comparison to most tuners who charge anywhere b/w 500-700 etc...

Im in agreeance with you marko....fantatsic results...wow pretty impressive!!! Im amazed at the difference with the cam adjustment...thats worth the extra $$ to me!!

I spoke to them today they said $350-750 for a full tune  :) who knows but..

Doing a power run on Saterday morning to see what this biatch is making  :Pimp2:

I'll bet you $50 that he wants to change the oil, and spark plugs before tuning it.

And it seems the more power a GTR makes, the more he charges... Presumably because there's more liability and less room for error with highly-strung GTR engines.

Understandable I guess, but it gets old when you're told "$350-750" and then get slapped in the face with a $1500 bill.

Anyway, good luck, and you have to come to the next dinner and let me take it for a spin... I'm having major power withdrawls :P

P.S. Have you put on an oil cooler yet? :squint:

I'll bet you $50 that he wants to change the oil, and spark plugs before tuning it.

And it seems the more power a GTR makes, the more he charges... Presumably because there's more liability and less room for error with highly-strung GTR engines.  

Understandable I guess, but it gets old when you're told "$350-750" and then get slapped in the face with a $1500 bill.

Anyway, good luck, and you have to come to the next dinner and let me take it for a spin... I'm having major power withdrawls :)

P.S. Have you put on an oil cooler yet? :squint:

I'll come to this months dinner..

I was going to get an Oil cooler but after 4 new so3's + rego i have no bling bling left :P

I'll come to this months dinner..

I was going to get an Oil cooler but after 4 new so3's + rego i have no bling bling left :P

There was a fair amount of meat left on those tyres?!?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...