Jump to content
SAU Community

Recommended Posts

Hi everyone,

After a long and extensive search i have finally found out that i have a twin Garrett GT2560R setup on my GTR!!

I thought they were N1's and then Group A's, but now i can definitely confirm that they are GT2560's!

Wanted to find out who is running this setup and what sort of power people have been making??

Are they the same as the larger R34 N1's??

Any info would be great!!

Cheers,

Francisco

Link to comment
https://www.sau.com.au/forums/topic/78172-gtr-turbos-garrett-gt2560r/
Share on other sites

Was going to get my original turbos rebuilt....but am having a set of these GT 2560's fitted instead around the 11th July I will post dyno results but am not looking for Huge HP figures, so dont expect to be overly impressed.

I was told they are very similar to N1's.

Although I beleive pnblight is running these turbos and has made 530rwHP.....

i took 1 million photos of them when my engine was out and couldnt match the numbers & position of the marks on the front covers with anything, until i saw Spool Imports photos!!

Then Checked the photes with other suppliers pics & It all matches up, i couldnt figure out how group A's would contiunue to spin for 20secs after i switch the engine off!! I knew they were ball bearing, but thats it

Pete , those are the terbs we can get for a good price but they have none in stock and looks around 3 months before they will have some more.

Have our guys trying to convince Garrett to speed up the wait as with the new pricing , these are very good value for money.

Cheers

Ken

Guys

I have R34 N1s on my R32 GTR and the Nissan part number is : 14411-AA403

Mine have the .42 compressor housing tho ( YES they DO Exist – and Nissan will confirm it if you give them this part number)

AFAIK these are series one R34 N1s and they came off an R34-GTR V-spec II

I'm getting 300+awkw ATM @ 1.2bar – but I NEED bigger injectors

HtH

Scott

hey guys just on the same topic i was wondering how these turbos that u r talking about (same as pnblight) how do they compare to hks 2530s in max power and response?

i hear people saying 500hp at wheels is too much for these turbos, but only pnblights freak gtr :( has got the higher figure.

im trying to decide between these turbos, hks 2530s, single t04z, single garret GT35/40R for my stock capacity rb26 wanting response as most importance and capable of abit over 500hp at wheels with suitable other parts which i have already :)

any info/comments most welcome

thanks guys

Brad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...