Jump to content
SAU Community

Recommended Posts

I am checking out a few things for a friend and came across a car yard in Perth Auto Japan - my question is has anyone bought cars from them and what sort of quality are they the main reason for asking is that there prices are quiet good and I am a firm believer you get what you pay for....

When I compared there prices to say John Hughes there seems to be a big difference in cost

Link to comment
https://www.sau.com.au/forums/topic/78607-car-yards-and-car-quality/
Share on other sites

Tell them to check out Autoworx in Wangara, some very nice cars there & are pretty cheap at the moment too. With John Hughes, all of their cars are grade 4 I believe, they only have the top quality ones there.

Way too expensive though, I imported a car that probably would have been grade 4 for under 17k, and they sell slightly older cars than that for 6k more. Err, no thanks John ya twat.

I am checking out a few things for a friend and came across a car yard in Perth Auto Japan - my question is has anyone bought cars from them and what sort of quality are they the main reason for asking is that there prices are quiet good and I am a firm believer you get what you pay for....  

When I compared there prices to say John Hughes there seems to be a big difference in cost

John Hughes aside you get what you paid for at most dealers, if the dealer is a RAW you will always get a better price.

On any car over $10,000 ask for a auction report or get a RAC inspection on the car and especially the structural integrity as I see what come in at the docks and their can be a big difference.

I think auto japan and the place in leederville is overpriced, auto japan is just down the road and i check it out often. There's a couple of ca18 sils for over $10k, an 89 32 unlicenced for $12k.

If you want a 32 contact me :)

I bought my R33 from Down Under Autos on Oxford Street, Leederville, in Jan 2003. They were very good to deal with and gave me a good deal. I have continued to use them for service since and they have always looked after me. Both the guy at the yard and the guy at the service garage have always been happy to talk to me and answer my stupid questions. They are also quite prepared to recommend other places for work that they don't do. Of particular interest is that they are a licensed RAW and they are also an RAC registered dealer - which means that all of their cars get RAC checks and the RAC also checks out various aspects of their quality management.

I am sure there are other good ones around too, but I received good service from these guys and will definitely talk to them when I am looking for a replacement.

As for John Hughes, they were very slick salesman and had some nice cars. Their asking prices were high, but they were prepared to move. I reckon I could have got a reasonable deal off them, but they did not have a Series II when I was looking. Overal, I reckon they would have ended up about $2k - $3k higher. Whether you get any more for that difference is your own judgment.

Cheers. :P

I bought my R33 from Down Under Autos on Oxford Street, Leederville, in Jan 2003.  Both the guy at the yard and the guy at the service garage have always been happy to talk to me and answer my stupid questions. 

I am sure there are other good ones around too, but I received good service from these guys and will definitely talk to them when I am looking for a replacement.

Cheers.  :)

pfft thats when everything in the car u bought have no faults wats so ever, once something goes wrong (and get this, while still under warranty) the warranty covers and does f**k all!!! Thats the thing u gotta look out for with this place, their phucked up so call warranty. i.e. doesn't cover any leaks wats so ever let it be water or oil. :cuss:

but the guys at their service depot is alright like u said.

the warranty covers and does f**k all!!! Thats the thing u gotta look out for with this place, their phucked up so call warranty. i.e. doesn't cover any leaks wats so ever let it be water or oil.  :cuss:  

but the guys at their service depot is alright like u said.

Used car warranties never offer much protection, except against major mechanical failure. I am sure that you would have found the same with any used car yard. Persuading a customer who is convinced that they are covered, when in fact they are not, is a hard job. The measure of the yard is probably how well they deal with that and how prepared they are to give a little in the grey areas. But don't expect any used car yard to give away much - they are not reknowned for their charity work!

Cheers. :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...