Jump to content
SAU Community

Recommended Posts

Well we are fixing a lot of stuff up on my car and i got a highflow turbo, and on the slightest accelation it flutters and on revving, and when not on boost it flutters. Just wondering how we can stop it fluttering so much. any help would be great

Thanks

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/
Share on other sites

do you have a pod? And what about the stock plumback BOV? Is that connected? And finally do you have an aftermarket BOV? if you do have an aftermarket BOV try loosening it, mabye the spring is too tight thats why you get flutter.

yep got a pod, no stock bov has aftermarket one, and no matter where it is adjusted it still flutters loosen it off or fully tight still does.

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/#findComment-1437482
Share on other sites

same thign happens to mine dude i had a blitz ss and now have a HKS SSQV no matter how loose i make the spring it still flutters like crazt out of the filter when accelerator is released.....i have th estock bov capped off but still in postition at the sake of loosing boost u rekon its worth runnin the stock and the HKS???

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/#findComment-1438567
Share on other sites

Aftermarket BOV's have a higher spring rate than factory bov's. So where the factory bov will open up when releasing light throttle, the aftermarket one does not. Please correct me if i'm wrong. when there is no bov this causes a build-up of pressure in the intake piping, slowing the compressor wheel - and hence the flutter. I think the same principle applies to aftermarket BOV's which don't open under light load, but obviously you don't have as much of a pressure build up as you would jumping off the gas from WOT.

There are a few war-threads where everyone has thrown their 2c in about BOVs which might be worth a read such as this.

:P

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/#findComment-1438939
Share on other sites

sorry i ment not when accelerating

Basically i'm saying it's not uncommon for car with aftermarket bovs to make the fluttering sound when backing off from light throttle. This is different when it comes to the HKS SSQ bov's and the like. when driving with a heavier right foot, the fluttering noise is by design and made by the BOV (and not the turbine).

:rofl:

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/#findComment-1439933
Share on other sites

i've got the same problem at the moment! however, only when i floored in 4th/5th gear from say 2000rpm and it flutter at about 3000rpm. 1st/2nd/3rd gear is fine as it will rev to 7000rpm! i'm thinking it might be the turbo surging. btw it's a GCG stage 1 high flow. anyone experience this before? any help would be appreciated!! :P

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/#findComment-1442162
Share on other sites

i've got the same problem at the moment! however, only when i floored in 4th/5th gear from say 2000rpm and it flutter at about 3000rpm. 1st/2nd/3rd gear is fine as it will rev to 7000rpm! i'm thinking it might be the turbo surging. btw it's a GCG stage 1 high flow. anyone experience this before? any help would be appreciated!!  :(

I HAVE THE SAME PROBLEM CRUISING VERY LIGHT THROTTLE VERY NOTICEABLE ON THE FREEWAY IT JUST KEEPS FLUTTERING. I HAVE A GCG HIGH FLOWED TURBO POD FILTER AND AFTER MARKET BOV. IM GOING TO TRY A STANDARD BOV. LET ME KNOW IF ANYONE DOES FIX THEIRS

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/#findComment-1443301
Share on other sites

i've got the same problem at the moment! however, only when i floored in 4th/5th gear from say 2000rpm and it flutter at about 3000rpm. 1st/2nd/3rd gear is fine as it will rev to 7000rpm! i'm thinking it might be the turbo surging. btw it's a GCG stage 1 high flow. anyone experience this before? any help would be appreciated!!  :(

Just put on a s/h hi-flow turbo, i believe it may be a GCG unit as it has the sierra-sierra turbine combination and is also b/b core. Whereas ATP replace the b/b core with a bush unit.

If i plant the foot in any gear the turbo spools nicely and puts down the power. If i cruise easily, at 0.5bar the turbo will flutter while i am still accelerating. Boost flutters back and forth between about 0.4bar and 1.2bar, till i floor it or change gear. The previous owner swears he had no such issue with the turbo. And i know my mechanic played arround with the integral gate, while on the dyno.

I have come up with a few possiblities that still need to be tested.

1/ Integral wastegate is not working 100%

2/ The intake pipe may be partly collasping under light loads (harmonics) thus effecting intake air.

3/ Also want to temporarily remove new Turbosmart bov, just to eliminate it as a fault.

Any other suggestions.

Link to comment
https://www.sau.com.au/forums/topic/78780-turbo-flutter/#findComment-1443314
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll want to have the block drilled and tapped to suit 1/2in head studs and the head for the same. How much power do you intend to make?
    • Sorry for resurrecting an oldish thread Not much has happened in the past year since the last update. The car did another 1000 miles or so and failed the MOT for the first time in October (failed on tyres which had been advised for a couple of years) In October the car got put up for sale and was removed in November due to no interest, being so close to christmas it was to be expected. The roads were dry in February so I decided to tax it early and get the new tyres fitted.   Fast forward to April, I got someone in to give the car a good clean after sitting for the winter.                                 The car got re-advertised and today (Saturday 3rd May) the car sold. The new owner is planning a GTR conversion at some point and a respray in the same pearl white. It's bitter sweet, it's a shame to have the car sit there for half the year and then only do 1000 miles. The kids are growing too quick and space in the back is getting limited. It's been a great 6.5 years of ownership
    • And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
×
×
  • Create New...