Jump to content
SAU Community

Recommended Posts

i have a link in my car was in there when i got it few shops have told me to piss it off if i want 200rwkw

last tune it got a shit 140rwkw on stock boost

my next goal is like 185rwkw on 11psi with new Dumps and hi flow cat mods r

Link computer

PWR front Mount

K & N pod

cat back Exhaust 3" with 1 box

Had Aftermarket BOV took it off due to defect feels a little more laggy

If links r ok where the best Shop to get it tuned

Link to comment
https://www.sau.com.au/forums/topic/79922-how-shit-r-link-computers/
Share on other sites

There's nothing wrong with Link ECUs. The tuner is the primary factor in how the car will run with an aftermarket ECU, not the ECU itself (unless it is a really limited one). They're used everywhere in NZ, so I'm sure the computer is fine. I'd head to Sydney.

I had a Link in a blown celica 10 years ago and it was shit. Their customer support was so pathetic that an australian distributer i bought it through ceased his dealings with them and refused to sell them.

I'm sure alot has improved in 10 years, but it's a case of "once bitten - twice shy" for me....

im running a link with my rb25, i think they are a great computer if you have a good tuner. my was tuned by tim sheather of electronic automotive at epping victoria. i personally would go with someone who is a good tuner and go with the ecu they recommend purely from a convenience stand point, ; ie no good getting a link if there is no one out your way that can tune them.

links are great running one in the r33 gtst and it finr had it tuned by AVO in melbourne the main Ausie supplyer and they are great i got 205Kw a the wheels on stock turbo and have been running for three years its great

I have personally had both a power fc and now a link and i would have to say from my experience i much prefer the link although that is for my setup so different things suit different cars. Your main problem would be the people you got the advice from don't know how to use them. I'd head down to Sydney as there are are few shops here that are good with them.

Care to elaborate, or at least point to some supporting evidence?

Cheers,

Lucien.

well... If people read the difference between I wouldn't have to. Also, just because a tuner is shit, or doesn't know how to tune a link, doesn't mean they are shit, and you run all over the internet trying to tell everyone that.

ok.

Thinks the link has over Powerfc -

Link Has Knock control

Link has Launch Control

Link uses the STANDARD boost solinoid on the R33's as a fully fledged electronic boost controller

Link comes with all the gear to plug straight into a laptop

Link ECU can have a MAFless tune

Link ECU has MANY more tunable options.

My advice, keep the link, get a tuner that knows what he's doing. There is a Tuner here in Mackay that specialises in Links, seen his work, he's tuned lots of 300rwkw+ cars, and guess what? He even tuned my PowerFC with the hand controller, and got 210rwkwn 420 nm torque, with it being a stock turbo, stock motor, FMIC and full exhaust.

I good tuner will never say something is shit, just because they don't know how to use it properly.

well... If people read the difference between I wouldn't have to. Also, just because a tuner is shit, or doesn't know how to tune a link, doesn't mean they are shit, and you run all over the internet trying to tell everyone that.

No point getting defensive, I was honestly after your opinion. Pointing to the paper specs is not very helpful as they tell you nothing about what its actually like to use.

Link Has Knock control

Link has Launch Control

Link uses the STANDARD boost solinoid on the R33's as a fully fledged electronic boost controller

Link comes with all the gear to plug straight into a laptop

Link ECU can have a MAFless tune

Link ECU has MANY more tunable options.

What about cold start, aircon, etc etc? Are all of these accounted for out of the box or do they have to be tuned? Some of those features are available in various forms of PFC (Pro / D-Jetro) or through addons, and its debatable how useful others are.

Lucien.

I had a link running my rb20 (t3/4, cooler, 3", etc) and it ran very well, although fuel economy was pretty poor, prob due more to my right foot tho....

I loved how it ran on a map sensor, NEVER back fired, stalled, or anything, and that was running either standard BOV, aftermarket BOV, or no BOV (tried 'em all).

Then, when i did an rb25 conv. i used the link on that too, which seemed ok, cold start was always a bit of a prob tho, it would constantly rev at 1000-1100rpm even when warm. Same deal as above with the map sensor.

Not sure about air-con, as the condenser was ripped out because of cooler piping.

I had alot of workshops tell me that they were shit, ended up at AVO who did as good a job as they could. I never tuned it for max power (sold now), just tuned to be driven (stock psi) after the conversion.

As stated already, they're VERY common over in NZ, and if tuned correctly, will stand up against most mid range ECU's.

But, having said all that, i've 'heard' that u cant really beat the power fc 4 an rb25.... choice is yours.

Thinks the link has over Powerfc -  

Link Has Knock control

Link has Launch Control

Link uses the STANDARD boost solinoid on the R33's as a fully fledged electronic boost controller

Link comes with all the gear to plug straight into a laptop

Link ECU can have a MAFless tune

Link ECU has MANY more tunable options.

The link plus also has anti lag, thermo fan control, intercooler water spray control, 3 stage shift light, boost cut, maps that allow tuning to 10,000rpm not 7000rpm like most ECU's. There is more in the ECU but i cant remember them all

GRACER makes 510kw at all 4 with a link and it drives perfectly so they cant be that bad ;):) We (Advan) use heaps of them.... we have about 15 of them getting about Sydney now installed in everything from MX5's and Mazda Familia GTR's to all models of GTR Skylines..... give us a call on 9647 1326 to dicuss getting your car tuned

The link plus also has anti lag, thermo fan control, intercooler water spray control, 3 stage shift light, boost cut, maps that allow tuning to 10,000rpm not 7000rpm like most ECU's. There is more in the ECU but i cant remember them all

GRACER makes 510kw at all 4 with a link and it drives perfectly so they cant be that bad :):) We (Advan) use heaps of them.... we have about 15 of them getting about Sydney now installed in everything from MX5's and Mazda Familia GTR's to all models of GTR Skylines..... give us a call on 9647 1326 to dicuss getting your car tuned

heheh I knew there were more features, thanks for adding them. Our tuner in mackay loves them.

Apexi PowerFc Standards are just an easy way to make a bit of power, you want to make alot, and have the tunability, get a link, or something different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...