Jump to content
SAU Community

Recommended Posts

I heard rumour from a good source at Ford, that they are currently developing an AWD system for the next Falcon. It is primarily the same drivetrain used in the Territory, but obviously modified to suit the Falc. This means there would more than likely be an XR6 Turbo AWD.

Now Im not a Ford fan at all, but I'll be the first to admit that an XR6 or Typhoon with AWD would be a lethal weapon. If released, would it have the potential to reach GT-R's level of performance and success? I'll be keeping a close eye in the rear view if it does!

Link to comment
https://www.sau.com.au/forums/topic/79926-awd-falcon-turbo/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

In the present future there is rumours of them putting an XR6 turbo motor in the AWD territory. In an AWD system it would be very very difficult to hold the amount of torque that the motors have the potential of making. Ford would have to make ane exceptional drivetrain in order to hold this sort of power.

Link to comment
https://www.sau.com.au/forums/topic/79926-awd-falcon-turbo/#findComment-1455140
Share on other sites

Ford, is currently using the territory as a test bed for it's awd system, but as someone here said getting the kilos down and the reliable drivetrain to cope with it will cost big dollars.

So even if it did comes out chances are a FPV only case, can't see it under $100k and on the wrong side of 2tones, I remmeber Holden once said, when they sticK an awd behind

5.7, then they'll teach the 2.0 litre brigade(wrx) a thing or 2, I'm still waiting. They've forgot one thing reall R&D cost lots of money and time.

Until now the turbo XR6 still show signs of being unreliable, god forbid what an AWD turbo would do.

Link to comment
https://www.sau.com.au/forums/topic/79926-awd-falcon-turbo/#findComment-1455284
Share on other sites

There have been rumours of that for a while from both the Holden and Ford camps..

I am not sure whether I can see it happening in a production car from them because of the cost, and being able to sell. Sure it would be awesome, but whether they can get the public to bite at $60k+ not so sure.

You have to remember also, that in places like Japan they can afford to throw millions more at development for fancy things as AWD, and trying many ideas that do and don't work during development, as they know they will sell XX hundred thousand rexes/liberties/evo's worldwide. Whereas in Australia, there just isn't that return on investment.

Link to comment
https://www.sau.com.au/forums/topic/79926-awd-falcon-turbo/#findComment-1455963
Share on other sites

BTW, the Nizpro Territory ran a 11.7 on the 1/4 recently

Yep a couple of records were broken that night, 11.7 for Territory:

http://www.fordxr6turbo.com/forum/index.ph...showtopic=18714

and 10.56 for an XR6T sedan.

http://www.fordxr6turbo.com/forum/index.ph...showtopic=18713

Link to comment
https://www.sau.com.au/forums/topic/79926-awd-falcon-turbo/#findComment-1457935
Share on other sites

Yeah, it might be a Ford, but it is also brand new and has a factory warranty.

While it is no GTR or Skyline, you guys are gonna want something that is a six cyl turbo in the near future and I bet a XR6T will be the top of the shopping list, I was so impressed I bought one.

$1500 in mods and I have a 12sec car that can carry 5 adults and their luggage:whatsthat

Link to comment
https://www.sau.com.au/forums/topic/79926-awd-falcon-turbo/#findComment-1458162
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...