Jump to content
SAU Community

Recommended Posts

What are peoples thoughts on these. I am considering getting one for use on my car for when leaving it for a month at a time. Still under cover (minimul wind). Reason generally after a month it will have a ton of dust on it with probably cat prints through it.

Im not sure what is best this or a cover which may rub the paint.

Any recommendations for covers. Doesnt need to be waterproof.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/
Share on other sites

i just bought a cheap nylon one for $30 from super cheap auto. it's just to keep the dust off because even in the garage my car still gets dusty because i live on a dirt road. it does the job well, but it does warn not to leave the cover on for longer than a week because it will damage the paint....how can a cover damage the paint??

cheers

greg

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-116998
Share on other sites

Nylon (tarpalun look?) I'd say could be abbrassive, depends on whether its kept in the wind or not. That is why i didn't get one of them.

I have a Autotechnica Evolution 2000 which i got for xmas. Was around $90. Waterproof and fairly soft material. Used it a few times, seems to do its job well. You'll need a "large" for a skyline.

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-117012
Share on other sites

I have just recently purchased a car cover that is made from perforated blue nylon and it tends to let the fine dust particles through which collect on the paint and window. When the wind blows it around, it makes swirly dust marks over the car. To overcome the problem i cover it with a couple of sheets first. So dont get one or those! Make sure it has a soft interior and an exterior that does not let anything through. That will be my next one.

Cheers

Jason

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-117300
Share on other sites

Car covers are great, however, i would never put one on a car thats even mildly dirty/dusty. The cover rubbing against the paint and the dirt in between causes scratches, swirl marks etc... Im not sure what the really good ones are like, but most I have experienced have this common problem.

Unless youve just cleaned the car, you stand a chance of damaging your paint more than your protecting it.

However for grepin's application eg: wash the car and then leave it covered for a month, it shouldnt be a problem.

Red17

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-117487
Share on other sites

Keep the replies coming. For my application due to work I have to leave the car for extended periods of time. Although it is under a carport it usually is still filthy when I return. It is good to know that a permiable(?) cover is no good. Its just the quality cover I need to decide on now.

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-117692
Share on other sites

I saw this funky car cover in Kmart that automaticlly retracted into its box when not in use, for about $80.

Car covers dont really provide much protection from rain/water coz it usually soaks through. Also, as above, make sure the car is clean first.

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-118373
Share on other sites

Originally posted by predator666

Mine seems to pretty water proof. Has managed to keep the car dry over the last few days of rain. Anyway, autobahn I got mine.

I must have a cheapie.... its like a tent, if its touching the car water goes through.

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-118406
Share on other sites

Make sure the car is clean and the cover is also before you put it on the car! It will damage the paint hardcore otherwise, i've seen it happen. Also an idea to put a clean, soft blanket under the cover before you put the cover on, once again make sure the car is CLEAN first....

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-118613
Share on other sites

Ryans Right,,,,Car needs to be clean and DRY,,,,.

Waterproof car covers suck,,,,the paint needs to breath,,,I know that sounds mad but it's true,,,you could end up with mosture under the clear coat,,,YUK,,,I've seen it before.

Better idea is to get someone to sew some flanalet bed sheets together with some elastic at the bottom,,,,.

Oh and Kill the cat.....responsable cat owners should have more control of there pets.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-119576
Share on other sites

Guest Boxhead

you could go one step further, and sue in the flanelet bed sheets too the car cover (on underneath)...

that way you get the benefit of the elastic and the little fold it in itself bag that my one has.. only used it when i iwashed the car and wasnt using it for a day or so..

so it owuld stay nice and clean

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-119614
Share on other sites

  • 2 weeks later...

bought a nylon one with elastic and clips when the garage was temporarily occupied......did its job untill one day when it got really windy.....took the cover off the next day and found a heap of scuff marks on the passengers side caused by those nasty plastic rings used to thread rope thru.....baahh!!!!!

and yes...i second the motion..."kill those cats" got claw scratch marks on the rear side pannel from a ferral cat....it was considerate enough to even the car out by scratchin the other rear pannel a couple of weeks later :grin:

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-128948
Share on other sites

I want to get one for protection from people...I dont want people knowing that its a skyline and then coming along and keying it or trying to break in!!! Why do we live in such a corrupt world?? So which would be the best considering my car will be immaculately clean and it could get windy at times!

Link to comment
https://www.sau.com.au/forums/topic/8025-car-covers/#findComment-129028
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...