Jump to content
SAU Community

Recommended Posts

Kangaroo Valley's "Far",,,,. You gotta get out more often porg,,,,.

I was thinking about the Canberra,,,Gong and Lower Coast Crews joining us as well buddy,,,.

Could be as good or better than last time.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/8053-big-event-sydney/#findComment-117793
Share on other sites

Originally posted by ndr

Kangaroo Valley's "Far",,,,. You gotta get out more often porg,,,,.

I was thinking about the Canberra,,,Gong and Lower Coast Crews joining us as well buddy,,,.  

Could be as good or better than last time.

Neil.

i don't think it's far and i don't mind driving out that way but if it means a few ppl won't come because of the distance then i'm not for it. the majority of ppl are from sydney and only a handful from out of sydney so you do the maths :) would be nice to get our neighbours to come though.

Link to comment
https://www.sau.com.au/forums/topic/8053-big-event-sydney/#findComment-118183
Share on other sites

What about a track day at Wakefield Park? It's a bit closer for the Canberra and South Coast people and not that far from the Gong either? I don't think the BBQ thing would be an issue there. They are generally pretty good.

I'd be keen for anything to meet more people. Something always seems to come up when cruises are on with me.

Link to comment
https://www.sau.com.au/forums/topic/8053-big-event-sydney/#findComment-121458
Share on other sites



  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...