Jump to content
SAU Community

Recommended Posts

  • Replies 108
  • Created
  • Last Reply

Top Posters In This Topic

accusump is a waste of time/money. actually i don't know that for a fact, just srpouting crap other people have told me. they do know what they are on about though so i usualy listen.

i reckon go the dry sump if standard + baffles is not doing the job (also providing it's legal for your class GTR Geoff).

We were just running the trust sump extension with baffles nothing special obviously :) But I can only blame the engine builder, I guess I can drive better than I build engines lol

Bec unfortunately I don't think either round is on TV :) but I will post up if they are :ph34r:

I think it's all just Sydney Sump Baffle Syndrome (SSBS) or the local builders up there :D

I've heard some good things about the Accusump and at about $1k seems comparably priced to a good sump job with the added benefit of low pressure detection and activation and a warning system. Portable to any car as well so worthy of thought. Our top lapper in Qld is running it as well but has never had it activate so either is soft or the track simply doesn't require it..........

I'm not racing a particular class right now but intend to once in Brisbane. I guess it won't be in a Skyline though due to the limited racing available.

I think it's all just Sydney Sump Baffle Syndrome (SSBS) or the local builders up there :rolleyes:

yeah can't argue with that. the folk up this way do seem to fear the SBS a lot. I have had the GTR out on Oran Park GP (a few times) and Eastern Creek without baffles (well as far as i know, they could be there i guess). but having said that i just last week bought a set of tomei baffles.

I've heard some good things about the Accusump and at about $1k seems comparably priced to a good sump job with the added benefit of low pressure detection and activation and a warning system. Portable to any car as well so worthy of thought. Our top lapper in Qld is running it as well but has never had it activate so either is soft or the track simply doesn't require it..........

yeah, my only criticism of the accusump is that it's reactive in that it will activate when it detects low pressure, but by then it may be too late. it only takes a split second from what i hear to do some nasty damage.

Troy, lol at count hardcore...i like it. Yeah, dry sump is probably not for me, the sump baffles were only a couple of hundred, the bitch is putting them in. dry sump system i guess would way about the same as a accusump. though i guess some weight would be in the extra oil you would be carrying.

I think it's all just Sydney Sump Baffle Syndrome (SSBS) or the local builders up there :(

I've heard some good things about the Accusump and at about $1k seems comparably priced to a good sump job with the added benefit of low pressure detection and activation and a warning system. Portable to any car as well so worthy of thought. Our top lapper in Qld is running it as well but has never had it activate so either is soft or the track simply doesn't require it..........

I'm not racing a particular class right now but intend to once in Brisbane. I guess it won't be in a Skyline though due to the limited racing available.

Honestly I think it is the ciruits, Oran Park and Eastern Creek are far harder on oil surge than Sandown, and Wakefield is probably a bit harder than Winton due to the altitude change.

You may remember that red Commondoor at Sandown, it runs an Accusump.

Hi Roy, in total weight terms the dry sump set up weighs a little more, but it is much better for weight distribution. The 10 litres of oil is in the tank in the boot and we also mount the oil cooler, catch can and oil filter at the rear as well. All up it moves around 12kgs from the front to the rear. And that's a big advantage.

Plus we run a scavenge stage for the cylinder head, so dynamically there is far less oil up high as well. This improves the front CoG a bit. The removal of oil from the sump increases the horsepower as the crank is not hitting oily mist. Not to mention the negative sump pressure from running excessive scavenge (in total terms), that gives as a few horsepower as well.

I would trade of the few kgs extra weight for those advantages every day.

:rolleyes: cheers :)

Agree with it all. So no dry setup on that barge..... Exxy engine to take the chance with so accusump must be alright then.

I believe it reacts to a sudden pressure drop before critical flow rates.

Wouldn't the Island be the hardest of all the tracks for oil surge? I know its a killer for fuel surge! Look at my front tyres from fuel surge at the Island (ABS failure due to engine cut from fuel surge and my consequent lack of skill)

5136Your_trying_hard_enough01.jpg

But SBS still isn't an issue at the Island from what I've ever seen either. I still reckon you guys up there are just stuffing around with all the GTR's so that you can keep the GTST's looking quick! LOL

Wouldn't the Island be the hardest of all the tracks for oil surge? I know its a killer for fuel surge! Look at my front tyres from fuel surge at the Island (ABS failure due to engine cut from fuel surge and my consequent lack of skill)

5136Your_trying_hard_enough01.jpg

But SBS still isn't an issue at the Island from what I've ever seen either. I still reckon you guys up there are just stuffing around with all the GTR's so that you can keep the GTST's looking quick! LOL

Oh no, Bathurst is far harder than Philip Island on oil surge because of the altitude changes.

You have to keep in mind that our GTR's (particularly the Production ones) are built to regulations, not "stick whatever you like on it". Plus Duncan spent a long time sucking hot air from Phil's GTR, not to mention the high speed spin when the brakes failed.

Oh, that reminds me.....did the engine run backwards during the spin Duncan?

:P cheers :D

For those of as not on the racing scene, what does that imply (ie. did the commondoor fail or ...)?

Oh no, it's a winner at Sandown, the track suits it, 2 drag strips joined by a wiggle. But he is coming up to Eastern Creek, so it will be interesting to see how it goes on something a little more technical.

:( cheers :)

Leanne will kick his butt :(

Undoubtedly, but it will be interesting see how Dave in the GTR gives him some hurry up. Plus we have a few more big horsepower cars up here that he won't blast past quite as easy. Should make for some good viewing on Speedweek.

:) cheers :)

Should get the rednecks charged up though, a VK crumpledoor with a V8SC donk

That's nothing, you should see the Foulcan with the 6 litre Sprintcar engine go :( , it's got another 100bhp on the Commondoor.

:) cheers :)

Wouldn't the Island be the hardest of all the tracks for oil surge? I know its a killer for fuel surge! Look at my front tyres from fuel surge at the Island (ABS failure due to engine cut from fuel surge and my consequent lack of skill)

5136Your_trying_hard_enough01.jpg

But SBS still isn't an issue at the Island from what I've ever seen either. I still reckon you guys up there are just stuffing around with all the GTR's so that you can keep the GTST's looking quick! LOL

holy shit snowman. that's some nice flat spots you have there. more to the point though, please sell me your wheels... :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...