Jump to content
SAU Community

Recommended Posts

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

u can make it fit, depending on the tyre you run up front and the offset all around.

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

235/40 would be a much better option for a daily driver, 255's will scrub on the guards and possibly on the suspension up front. 255's are overkill, especially up front, better of spending more a quality smaller tyre. also not 100% sure about 18x9.5 +35's fitting up front, id be worried about upper control arm clearance, saying that im not too sure how much clearance R33's have.

quick questioin

which would fit better to my sedan

18 x 8 +35 all round

or

18 x 9 +30 all round

car will be fair low as well, so might need liping?

Cheers

depends what tyres u run, if u run relative sizes for each width, for example a 215 on the 8" and a 235 on the 9", the 8" with the 215 will have more clearance both from suspension and guards. 9" will sit a lot more nicer and allow better sized tyres, and still fit as long as u long as u dont run over a 235-245 up front.

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

215 and 225 will be fine, but as i said u could get away with a 235 up front, and probably like a 255 up the rear if u really wanted.

  • 2 weeks later...

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

For circuit work, with slicks

For road rally work i am thinking 8F & 9R

  • 2 weeks later...

Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

Edited by GTS4onP
Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

doubt it, rear they will probably fit no worries, fronts i strongly doubt it, will most likely foul on the UCA's pretty bad.

i want something that will really fill the guards though)

20x8

+42 offset

:P:down::laugh:

Quick question, do you think 17x9 +20's all round with 225/40 tyres would be too much for a R32 GTST 2 door with stock guards at quite a low height (currently 17x7s all round, tyres in guards almost)?

Edited by Ceffy_SA
^^will sit very nice depending on camber, but u will need to roll the guards, no pulling or flaring needed.

Ok thanks that was the answer i was looking for, not my car but a friends, will be having the wheels fitted by Wheelworx this weekend, sill put pics up when its all done.

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

Wheel diameter = 18

Wheel width = 9.5

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Tyre size = 235/45/18

Modifications to fit = 15mm bolt on spacers all round to clear the brakes + lipped and rolled guards.

post-43220-1216273660_thumb.jpg

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Yeah 20 now. Further out is a smaller number. That's a pretty aggresive offset! Did you need the spacers to clear the suspension?

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

i ran 235/45's all day every day on R33 GTR rims, 17x9 +30 with a 235/45 is pretty much the limit for inner clearance, u wont need a flare to fit it in the guard, but ull need to roll the guard, which is something u need to do to fit any decent size wheel. depends how much camber u are running as well, but imo its perfect size for stock guards.

DSCN0042.jpg

Hi guys, as for me I have

Skyline model = R33

Wheel diameter = 18"

Wheel width = 8" front, 9.5'' rear

Wheel offset = 35

Tyre size = 235/45/18 front, 265/45/18 rear,

as for winter (here in Russia its a bit snowy :D ) I put on rear 245/45/18

post-53258-1216368120_thumb.jpg

post-53258-1216368212_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys, long time no post as per usual! It's been a busy year so far, the biggest thing being a new job.  After 28 years in the automotive industry I decided it was time for a change.  I was losing faith in the industry and where it's heading.  Now in a completely different industry (electrical) working for a company that manufacture water pump contollers.  Not as sexy as cars but it's an interesting,  challenging industry. I now don't work Saturdays which is a bonus!  It's still 50-55 hours a week but having Saturdays ack after 28 years of working them is awesome!   No news on the GT-R but i did decide to add some more JDM goodness into my life....           1990 300 ZX.  She's not perfect but for a 35 year old car she ain't bad!  Just going to tidy it up a bit and enjoy it.  It's currently auto but will start stockpiling everything for a manual swap. It WILL distract me even further from the GT-R but im hoping not for too long! It somewhat proves a 6'8" freak can fit in a 300 ZX.  Sort of...  I drove it home from the previous owners house in Melbourne via Black Spur and Merton Gap (2 awesome bits of Victorian twisty road) and it was amazing!  Handles so well!!!   I don't think it would be worthy of a full build page but I'll post up some of the upgrades here if anyone is interested?  Cheers guys!
    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
×
×
  • Create New...