Jump to content
SAU Community

Recommended Posts

er... dood... that's anything but low...

i would say that is just the perspective of the photo as i was trying to get a pic of how the new rubber sat etc. as such it makes the car look quite high as you are looking up into the arches

see my garage pics for normal perspective http://www.skylinesaustralia.com/forums/index.php?app=garage&do=view_image&id=3397

basically you can get your pinky finger in between the top of the tyre n the wheel arch- just

nonethless, horses for courses. I get alot of people commenting how low my car is. To other people its only low if the rims are up under the guards... (i.e. see my other garage pics with the series 1 spoiler n drift suspension)

;)

it's still not that low... it's clearly below stock heaight, but it aint slammed

my point is that you cant run your car at that height and say that people can have low with 275's on a 9.5" +36 rim without flaring your guards or heaps of camber. if anyone tries to slam their car with those specs they will run into trouble.

i run my car lower than yours and had to pull my guards to fit 9.5+25 with a 245/40

exactly. One persons low is another person's stilts.

Worth clarifying in people's minds before they get in and assume a give rim/offset/tyre will fit...

:thumbsup: exactly

Wheel: Lenso/Raiden D1R (Project D)

Skyline model = 1994 R33 GTST

Wheel diameter = 18"

Wheel width = 8.5" Front, 9.0" rear

Wheel offset = +35 Front, +32 Rear

Tyre size = 245/40ZR18 Front 265/35ZR18 Rear

Modifications to fit = Roll Guards

Car2.jpg

Car3.jpg

Want to correct the camber a bit so may need to do something with the guards if I do that

Edited by 89CAL

Folks:

All this offset stuff messes with my poor old head...

I have an R33 GTS-T at the stock height.

I'm looking at some old Rays GT2s in 17" x 8.0" all round, with +33 offset.

No troubles with those? Any other thoughts?

Thanks!

Folks:

All this offset stuff messes with my poor old head...

I have an R33 GTS-T at the stock height.

I'm looking at some old Rays GT2s in 17" x 8.0" all round, with +33 offset.

No troubles with those? Any other thoughts?

Thanks!

That will fit without any issues at all

they sit in the guads

Folks:

All this offset stuff messes with my poor old head...

I have an R33 GTS-T at the stock height.

I'm looking at some old Rays GT2s in 17" x 8.0" all round, with +33 offset.

No troubles with those? Any other thoughts?

Thanks!

they'll sit in the guards alot

Folks:

All this offset stuff messes with my poor old head...

I have an R33 GTS-T at the stock height.

I'm looking at some old Rays GT2s in 17" x 8.0" all round, with +33 offset.

No troubles with those? Any other thoughts?

Thanks!

the only useful thought i could provide is look for something better sized. Not saying go grab some 10" wide phat ass wheels but at least an 8/8.5 F and a 9/9.5 R gives you some more tread to work with AND looks 11bty timesbetter.

if you need any help with size/offsets for that let us know. :thumbsup:

as a general rule if you are running wider rubber its always worth rolling your guards at some point you'll likely lower the car too and it will be relevant then so for $50 or so a corner its a good investment to roll ya guards out the way cos if you dont and ya munch your guard cost ya more than $200 to fix it :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...