Jump to content
SAU Community

Recommended Posts

and to keep on thread topic here are details of what i am running on my R32

R32 2 door coupe

Work Meister S1R

Skyline model = R32

Wheel diameter = 18"

Wheel width front = 9.5"

Wheel offset = -30 (negative 30)

Tyre size front = 235/40/18

Wheel width rear = 11.5"

Wheel offset = -47 (negative 47)

Tyre size rear = 315/30/18

Modifications to fit = lots and lots

..............................

R32 4 door coupe

Varrstoens 2.2.1

Skyline model = R32

Wheel diameter = 18"

Wheel width = 9.5"

Wheel offset = +12 (positive 12)

Tyre size front = 235/40/18

Modifications to fit = lip the guards (added 25mm fronts later however will tuck under stocks)

post-2127-0-80210900-1349254434_thumb.jpg

post-2127-0-93135400-1349254571_thumb.jpg

post-2127-0-86429400-1349254497_thumb.jpg

Edited by Frosty

hey fellaz im looking into getting some 19 x 10 +20mm wheels for a GT-T as I will be getting a wider bodykit. Just wondering if anyone knows about speed recalibration as this will make my speed atleast 10% above the dial speed.

im a noob with tyres and sizing them up would need some help on what tyres would fit and which ones would need stretching is anyone running this sort of setup on a skyline?

widebody and only 19x10 +20? Standard guards and run that

widebody and only 19x10 +20? Standard guards and run that

widebody and only 19x10 +20? Standard guards and run that

so your saying i can run those with standard guards?

I dont want any defects so i thought I will run 18 x 10 +20mm with standard guards for a short time then put on a 30mm wider bodykit when cash permits

I don't think 18x10 +20 would be enough to fill 30mm wide guards on an r34 GT-R, unless you run like a tall/wide semi slick tyre or something.

Police could technically defect you either way with that size, so I wouldn't take that into consideration.

and to keep on thread topic here are details of what i am running on my R32

R32 2 door coupe

Work Meister S1R

Skyline model = R32

Wheel diameter = 18"

Wheel width front = 9.5"

Wheel offset = -30 (negative 30)

Tyre size front = 235/40/18

Wheel width rear = 11.5"

Wheel offset = -47 (negative 47)

Tyre size rear = 315/30/18

Modifications to fit = lots and lots

..............................

R32 4 door coupe

Varrstoens 2.2.1

Skyline model = R32

Wheel diameter = 18"

Wheel width = 9.5"

Wheel offset = +12 (positive 12)

Tyre size front = 235/40/18

Modifications to fit = lip the guards (added 25mm fronts later however will tuck under stocks)

hee hee, you said 4 door coupe :P

keen to see the 2 door sorted

would 17x10 +15 offset fit on my r32 gtr without any modifications?

cheers, lozz

They should fit on no worries. How much poke - that I am not sure of. I think they may fit nicely.

Does anyone know how much smaller 32 gtr guards are smaller then 33/34 gtst/gtt guards?

They should fit on no worries. How much poke - that I am not sure of. I think they may fit nicely.

Does anyone know how much smaller 32 gtr guards are smaller then 33/34 gtst/gtt guards?

my guess would be 10 - 15mm wider a side

overall width is around 25 - 30mm wider

yes... with a lot of work

will need to roll and pull guards, if not flare them.

if you refuse to flare them you will need homo spec camber on the rear

clearly guard liners will have to come out

yes... with a lot of work

will need to roll and pull guards, if not flare them.

if you refuse to flare them you will need homo spec camber on the rear

clearly guard liners will have to come out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...