Jump to content
SAU Community

Recommended Posts

this is bad advice! Not to mention these are illegal

Because slamming your car and having rims poking 10mm outside the guard isn't.

Hub centralising spacers are fine for daily use - if he told me he was tracking it I would have said no.

Because slamming your car and having rims poking 10mm outside the guard isn't.

Hub centralising spacers are fine for daily use - if he told me he was tracking it I would have said no.

clearly you have no idea what is good and bad when it comes to suspension/wheels but im not going to get into an E fight with you...FYI i bolded that section of your quoted text for a reason!

let me know when you have some experience in suspension

How would fitting xxr002 16x8 +0 go for a r32 gtst coupe with 205/50 tyres? I'm wondering how brake clearance would be and if spacers would be needed. I have a guard roller and adjustable camber arms.

brake clearance shouldnt be an issue.....pretty agressive wheels tho! pics when fitted

clearly you have no idea what is good and bad when it comes to suspension/wheels but im not going to get into an E fight with you...FYI i bolded that section of your quoted text for a reason!

let me know when you have some experience in suspension

he's got you there damo... you said illegal, which having rims out of your guards is :P

Won't fit over the front calipers. Knew itd be an issue but was being hopeful lol, time to buy spacers

Thought they would have fit easy, i have 15x10's on my 33 and they fit no problem

Edited by Autumn33

Chaps,

After reading through 115 pages of this thread, I have a bit better of an idea of what sized wheels I should be looking at, but this question is more R34 GTT specific.

I'd like to run

18 x 9 +20 Front (235/40)

18 x 10 + 12 Rear (245/40)

I currently only have Blitz ZZ-R coilovers fitted, but open to comments about what other kind of suspension components needed to run this setup.

Cheers,

Shazza

Chaps,

After reading through 115 pages of this thread, I have a bit better of an idea of what sized wheels I should be looking at, but this question is more R34 GTT specific.

I'd like to run

18 x 9 +20 Front (235/40)

18 x 10 + 12 Rear (245/40)

I currently only have Blitz ZZ-R coilovers fitted, but open to comments about what other kind of suspension components needed to run this setup.

Cheers,

Shazza

no issues with the coilovers there. Will need to lip the guards on the rear but the fronts will be no issues. would help if you had rear upper adjustable camber arms but shoud be able to squeeze them in without too much hassles

Hi Frosty,

Thanks for the quick reply. I intend on getting a set of rear camber arms, and front eccentric camber adjustable bolts for adjustment regardless.

Would a 255/40 fit on the 10" wheel on the rear, without much issues?

Cheers,

Shazza

Hi Frosty,

rear camber arms, and front eccentric camber adjustable bolts for adjustment regardless.

Would a 255/40 fit on the 10" wheel on the rear, without much issues?

Thanks for the quick reply. I intend on getting a set of Cheers,

Shazza

255 is a big tyre you would want to run a smaller tyre unless you go mexican and run camber but then defeats the purpose anyway. if you look at my signature the one on the right is a R32 with 18x9.5 +12 all round with 235/40 an the GTT is roughly 15mm wider each side in the rear

not at all and only if its more than 25mm ;)

The wheel and tyre must be contained within the body work or mudguards (including any flares) when the

wheels are in the straight ahead position.

http://www.rta.nsw.gov.au/registration/downloads/vsi/vsi09_rev4.pdf

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...