Jump to content
SAU Community

Recommended Posts

I think heaps of people run +22 all around with little tyre. Might want to check front clearance before you go putting money down.

Can't seem to find +22 on their website?? Only have +38, +35 and +18

Can't seem to find +22 on their website?? Only have +38, +35 and +18

Bugger. How much tyre/camber/low are you planning on running?

+18 would easily fit the rear but im not sure what needs to be done to fit the front. Probably bit of camber and little tyre?

edit: Seems someone has answered you on facebook. I think he is right, probably better off going a staggered setup.

Edited by dontyellpl0x

Yea got an answer for fitment on the rears, only problem is the only width Rota offers is 9.5 or 10's so can't go staggered fitment unless I get the normal Rota Grids but then I won't have the concave look the R's offer on the front.

Not planning on running any lower than it sits nowpost-34692-14078506335871_thumb.jpg

just run 9.5+18 all round

staggering is pointless and the front guards have heaps of room

will need to roll all 4 corners and remove the guard liners in the front.

front guards can literally be pulled to any spot they need to be and then moved back... just be sure to check front door and bonet clearance at the joins.

  • Like 2

Hi all , new to the forum thought id start somewhere ,just got a new set of wheels and tyres fitted and had an issue or two

Skyline model = R33 GTST S2
Wheel diameter = 19"
Wheel width = 8.5 , 9.5
Wheel offset = +25 Rear, not sure of front they but sit inside guards
Tyre size = 235x35 , 245x35
Modifications to fit = roll rear lips ,car at standard height atm fitting coilovers soon , rears look like they might need camber fix to lower it, fronts will need inners removed to lower. Rolling cost $70 a side ,nice job too no cracked paint yet :yucky: ...will post photos when i work out how to do it ..

with that offset and those tyres you should be fine (ultimately depending on how much you lower it though).

Otherwise the rears will naturally get more camber as you lower it so it will fix itself anyway.

TE37: 18x9 +20 all round, 245x40's on the front and 275x40's on the rear.

What issues/modifications will I encounter?

Car is HNR32 (GTS4 sedan).

I think you may have some clearance problems with the rear tires being that wide but I'm not 100% sure (may have to roll guards). Can anyone confirm?

Im guessing this is a track car given the wide tires?

Cheers

Skyline model = r34 GTT

Wheel diameter = 18"

Wheel width =10"

Wheel offset = + 15

Tyre size = ?

Modifications to fit = ?

Will these rims be legal in WA as well ? I know with diameter you can go 2" higher or lower but what are the limits to width? Any help would be greatly appreciated :)

Skyline model = s2 r33
Wheel diameter = 17"
Wheel width =9"
Wheel offset = + 22 (or 25 cant remeber)
Tyre size = 235/40
Modifications to fit = none

Plenty of caliper clearance, no problems when turning. Will upload photo soon

Amir

Skyline model = r34 GTT

Wheel diameter = 18"

Wheel width =10"

Wheel offset = + 15

Tyre size = ?

Modifications to fit = ?

Will these rims be legal in WA as well ? I know with diameter you can go 2" higher or lower but what are the limits to width? Any help would be greatly appreciated :)

no they wont be legal. 2 reasons

1st is they wont sit inside the guards.

2nd is that yes there is a limit to how much wider you can go from stock rim width and im sure a 10" rim is it. I remember checking one time if my 9.5 inch rims would be too wide and indeed they were. I think it is 1 inch wider or something boring like that. However you are unlikely to get any greif from this too much, the wheel outside the guard will be the one that gets you (as well as the high camber and stretched tyres to make it fit)

GL

I'm looking at getting some rims for my r33 gtst.

17x9+35

17x10+25

I'm not sure if they'll fit. Cars lowerd on tien coilovers. If they fit what tire sizes are people running with these sizes. It's a daily driver any info would be appreciated.

Skyline model = r34 GTT

Wheel diameter = 18"

Wheel width =10"

Wheel offset = + 15

Tyre size = ?

Modifications to fit = ?

Will these rims be legal in WA as well ? I know with diameter you can go 2" higher or lower but what are the limits to width? Any help would be greatly appreciated :)

Lol no

Skyline model = r33 gtst

Wheel diameter = 17

Wheel width =9 inch front 10 inch rear

Wheel offset = f +35 r +25

Tyre size = ?

Modifications to fit = ?

front will be fine with a 245 or something and maybe pushing the guards back a bit.

rears will be a bit of fun. its going to sit outside the guards so you will need to roll the rear arches, put camber on it and probably also run a 245.

I hope that is the look you are going for...

  • Like 1

Skyline model = r34 GTT
Wheel diameter = 18
Wheel width =9.5
Wheel offset =+20
Tyre size = 225/40 fronts, 245/45 rears
Modifications to fit = Guard roll all round, rears will be dropped down to 245/40 and camber arms installed

They are poking about 10mm fronts, less on rears as they are cambered in with natural lowering. Will get an alignment done and report back.

post-80854-0-86713300-1409679830_thumb.jpgpost-80854-0-88391800-1409679854_thumb.jpgpost-80854-0-53818600-1409679866_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...