Jump to content
SAU Community

Recommended Posts

Will I need any mods or spacers or guard rolling ????

Skyline model = r34 GTT

Wheel diameter = 17"

Wheel width = 9.5"

Wheel offset = +12

Tyre size = ?

Modifications to fit = ?

Stop being a moron. Go back 1 page, and look. Oh wow there is 9.5+20 there, ON AN R34! Oh and he has written the mods to fit!! It's almost like this thread is full of information or something.

  • 2 weeks later...

Skyline Model = R32 GTST
Wheel Diameter = 18"
Wheel Width = 9.5 Fronts 10 Rears
Wheel Offset = +18 Fronts +15 Rears
Tyre Size = 235/40 Fronts 265/35 Rears
Modifications to fit = 20mm wide front guards 30mm wide rear guards
Fronts = 2.5deg neg camber
Rears = 1.5degs neg camber

Any many many hours fiberglassing
Is lowered cant figure out how to upload photos. everytime I use the photo/link button above and copy a link across from photobucket is freezes -.-

Edited by Cxxo

If you go into the "more reply options" you can upload and attatch, rather than linking via a site.

Is lowered cant figure out how to upload photos. everytime I use the photo/link button above and copy a link across from photobucket is freezes -.-

HI Guys, getting new tyres soon for my R34GTR.

I have Advan 18x10 +25 rims and they do not have the tyres I want in a 275x40 18 , but they have a 285x30 18 , would they fit without scrubbing.

I just went thru every page of this thread :)

I did have 19x9.5+25 with 245s and no mods were required...they are now sold i want jap wheels.

now im tossing up between the following for my r32 gtr:

1). 18x9.5+22 with 265s ('safe' option with gauranteed clearance on full lock & guards)

OR

2). 18x10+20 with 265s (will work with with no mods if i run nitto invo tyres, thx SIR-RB for the advice)

decisions decisions...also looking for other ppls opinions :)

Ok thx for the feedback :)

Would it be optimistic of me to think I can run 265s on 10s without guard rolling or is this simply required from your personal experience?

Where did it rub on your inner guards, on the front which sits directly behind the bumper bar right? What tyre brand are u running?

Ok thx for the feedback :)

Would it be optimistic of me to think I can run 265s on 10s without guard rolling or is this simply required from your personal experience?

Where did it rub on your inner guards, on the front which sits directly behind the bumper bar right? What tyre brand are u running?

I rolled the guards myself (on the rear). Previous tyres bashed the lip out on the front guards lol. Rolling is required unless you car is high. It'll probably still scrub.

Yep the front part, because I used to run a bit more caster. Had to dial some caster back and add negative camber up front (around -2deg, -1.5deg rear). Caster is around the 5deg mark.

I'm running Falken FK452 at the moment. Previously had old Bridgestone TS-02 or something with more rounded shoulders so didn't need guard rolling.

If you're worried about not rolling, then get 9" and run 255 wide tyres. I would rather roll and try to cram the widest tyre possible :P.

Model: r34 gtt

Wheel diamiter: 18"

Wheel width: 9.5" all round

Offset: +15 all round

Wheel size:225/40

Hi, I'm looking to buy a set of hks coilovers for my car and I saw these wheels for sale. If I bought these wheels how far could i lower my car before I would need rolling of the guards ? Also I'm not an expert on tires so while I'm posting this will 225's fit on 9.5's without any issues ?

Model: r34 gtt

Wheel diamiter: 18"

Wheel width: 9.5" all round

Offset: +15 all round

Wheel size:225/40

Hi, I'm looking to buy a set of hks coilovers for my car and I saw these wheels for sale. If I bought these wheels how far could i lower my car before I would need rolling of the guards ? Also I'm not an expert on tires so while I'm posting this will 225's fit on 9.5's without any issues ?

If you leave it stock height with reasonable tyre profiles, you won't need a roll at all. But that offset is fairly aggressive, and if you lowered at all you would need guard rolling and 2 deg negative camber to fit inside the guards. And yes, 225's sit nicely on a 9.5.

Refer to previous page, I have 225/40 on 9.5+20.

I rolled the guards myself (on the rear). Previous tyres bashed the lip out on the front guards lol. Rolling is required unless you car is high. It'll probably still scrub.

Yep the front part, because I used to run a bit more caster. Had to dial some caster back and add negative camber up front (around -2deg, -1.5deg rear). Caster is around the 5deg mark.

I'm running Falken FK452 at the moment. Previously had old Bridgestone TS-02 or something with more rounded shoulders so didn't need guard rolling.

If you're worried about not rolling, then get 9" and run 255 wide tyres. I would rather roll and try to cram the widest tyre possible :P.

i had all my suspension dialed in by heasmans & i am very happy with it :)

i dont want to 'potentially' compromise handling for the sake of running wider wheels...from this, i purchased 18x9.5+22 & will run 265s as i was told this would clear.

now i need to decide on tyres - any recommendations?

nitto invo OR nt-05 sound interesting.

i get mixed feedback on the federal rsr's

Thanks mate :)

Street use really but I want optimum grip due to the power level I'm running...as long as the tyres aren't too sticky where they pick up small rocks and scratch the bodywork haha

Hi mates, first post on the forums.

I just got one of the first two R34 GTTs in my country (Costa Rica!) and I definitely want to change the wheels it came with...

I have read through this thread and a couple others and I arrived at the conclusion that some 18x8.5 +30 front/18x9.5 +38 rear seems like it will work with the all-stock car (please correct me if I am wrong here!)

From that, I am eyeballing the Work Emotion Ultimate Kiwami wheels and I am wondering if these will be a good fit.

Any comments and ideas are really appreciated! :thanks:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...