Jump to content
SAU Community

Recommended Posts

Im looking at getting rota grids wheels for my Nissan skyline r33 GTST; with 9.5 width and +18 offset, there 18 inch wheels, the car is also sitting on stock suspension so need to know if 18s will rub aswell need to know if it will stick out from my guards as I'm not wanting a defect from the po po, if someone is running the same offset please POST PHOTOS or let ME KNOW! thanks guys in advance!

Hi guys im looking at getting a new set of wheels for my R33 GTST, thinking of getting a 18x8+30 on the front and on the rear 18x10+30

Just want to know if i get 18x9+30 or +15 will it fit without any problem on the front with 235 or 245s

Rear will be guard rolled and a little pumped to fit the 18x10+30 or should i get a +15 and lowered with 285s

Also if any one has a similar set up on their R33 GTST please post a pic so i can have a look

Right now i have 18x8.5+38 front and 18x9.5+38 rear with 235f and 265r with no guard work

post-72907-0-62576000-1462163134_thumb.jpg

Hi guys im looking at getting a new set of wheels for my R33 GTST, thinking of getting a 18x8+30 on the front and on the rear 18x10+30

Just want to know if i get 18x9+30 or +15 will it fit without any problem on the front with 235 or 245s

Rear will be guard rolled and a little pumped to fit the 18x10+30 or should i get a +15 and lowered with 285s

Also if any one has a similar set up on their R33 GTST please post a pic so i can have a look

Right now i have 18x8.5+38 front and 18x9.5+38 rear with 235f and 265r with no guard work

attachicon.gifDSC_0576.JPG

Yes

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...