Jump to content
SAU Community

Yes or No?  

59 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

I've still got mine. There really isn't much point in taking it out unless you wanna hide a set of fuel pumps in your boot.

You'd be wiser having it in there just incase you find yourself with a flat even though I wouldn't trust my life to them

. plus worse case scenario is it actually acts as a good way to absorb a crash in the rear-end if some dero gets distracted by how nice your car is and forgets to hit the brakes.

Link to comment
https://www.sau.com.au/forums/topic/86475-yes-or-no/#findComment-1563188
Share on other sites

I'd like to remove mine but I've had to use it once.

Although without a toolkit (I was lucky and had one on me at the time) there's no point me having it there. I might remove it :P

Doesn't the R33 have the little toolkit behind the panel on the left of the boot ala R32?

Link to comment
https://www.sau.com.au/forums/topic/86475-yes-or-no/#findComment-1564163
Share on other sites

i dont have one in my gtr

it didnt come with a jack, and i figure if i cant jack the car up, i cant put a spare tire on, so no point having the spare either

you can buy those cans of stuff you spray into the tyre if you get a flat, that or dad can come rescue me

Edited by lang
Link to comment
https://www.sau.com.au/forums/topic/86475-yes-or-no/#findComment-1565140
Share on other sites

Yeah, the space saver is in there, although it wouldn't have helped without the tool kit that is supposed to be in there. Only the jack was there, no wheelbrace or jack handle. Took it back to the importer and he checked every Skyline he had and none had theirs either!! Seems they are a hot item in Japan????

Link to comment
https://www.sau.com.au/forums/topic/86475-yes-or-no/#findComment-1570508
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...