Jump to content
SAU Community

Recommended Posts

Hi

I have tein HR (non adjustable damper) and well whilst they are pretty harsh on bumps (i was prepared and can live with this), i have a quick question.

Would the stiffness of the suspension be harmful to the car? For example, many of Sydney's roads are broken, uneven etc and my car constantly goes up and down due to the hardness of the suspension. Is this very harmful to the car? eg. i dont want screws and bolts coming out of my car in the near future lol.

Cheers

Eric

Link to comment
https://www.sau.com.au/forums/topic/86875-coilovers-and-bumps/
Share on other sites

In the long run yes...I had coilovers in my Silvia for a couple of years and there are stress fractures all over my bodykit and thats just an example. I also kept on blowing my headlight globes and it was only on my 4-5th replacement that I was told that because my coilovers were so hard, it kept on shattering the filaments in the globes. I've since replaced the coilovers with normal sports suspension. I enjoy driving it again :) Coilovers were never really designed for everyday on road driving. There is a price to pay I guess.

Yes a too hard damping or spring rate can be harmful, as well as making the car lose grip and be slower on the track.

But FFS a coilover is when the coil is over the shock. Anyone wanna guess just how many cars other than Skylines come with this standard??? So what do you all use if you don't have coilovers?

:rant by terminology NAZI ends:

Just to add further 'helpful' comment, Japanese suspension is usually rediculously hard and oversprung. You can get new springs or better yet, the Whiteline stuff which uses Bilstiens.

Cheers

Yes a too hard damping or spring rate can be harmful, as well as making the car lose grip and be slower on the track.

But FFS a coilover is when the coil is over the shock. Anyone wanna guess just how many cars other than Skylines come with this standard??? So what do you all use if you don't have coilovers?

:rant by terminology NAZI ends:

Im converting to a live rear axle with leaf springs B)

When you order your coilovers you should be given an option as to the weight of the spring. I have some D2s comming for my Silvia which are a couple of kg lighter than standard so that they can account for Townsville roads... and I don't intend to ude it on the track :D

Cheers

  • 2 weeks later...
stu

they can supply softer springs?

might give them a buzz

thanks

sorry for being lazy and not searching but whilst on topic wat rates are good for a r34?

You may not be able to simply change the spring rates, the damping rate in the shocks are valved to suite the springs rates that it currently has. If you change the spring rates you might have to change the dampening rate as well. Compare the total cost with the Group Buy on Whiteline and Bilstein.

http://www.skylinesaustralia.com/forums/in...showtopic=88141

:rolleyes: cheers :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For your application, where you'll be at that 1/2" size or perhaps larger, yeah, excellent. Although not if you need a tight bending radius anywhere, because the corrugated stuff is not anywhere near as flexible as rubber/teflon cored stuff. But for turbo oil lines? No. Too big. They just don't do the corro stuff down at the ~1/4" ID size that you'd want, and if they did the OD of it would probably be a bit too fat for fitting it into the tight spaces available. I use hoses like that all the time for fuel gases (LPG, NG) and liquid fuels (HFO, diesels, waste oils). When we did the London Olympic cauldron, with the 204 individual burners on it, we had miles of the stuff (although a lot of that was teflon core). A bunch of that crap is still cluttering up the workshop, more than 2 years later!
    • Would something like this be an option  https://processhose.com/products/configurable-metal-hoses/1-2-in-t316-stainless-steel-annular-corrugated-configurable-flexible-metal-hose-assembly-with-ends-t304-single-braid-masterflex-af5550.html I'm looking at this for replacing the OEM EGR when installing a aftermarket intake plenum 
    • The once piece tail shafts with cv type joints on either end are the ones that end up vibrating and the vibration is caused by the cv joint binding as it turns, I’ve also seen them explode from the binding 
    • Take this with a pinch of salt, it's from someone (me) who got annoyed with turbos entirely. I hated aftermarket lines. If I had the option to use hardlines with whatever turbo I had - I would use them, 10/10, 100% of the time. The only reason people go larger, heat resistent, shielded lines etc is because they have to. And yes they don't last forever. Even if you spend big bucks on all the best heat shielding money can buy, with the best heat resistant, fuel resistant, oil resistant, radiation resistant hose, they get stiff and break down and just don't last the way a metal pipe will.
    • Unfortunately I am quite literally halfway across the globe. So all sources for parts like that are far away for me. What do you mean by that exactly?
×
×
  • Create New...