Jump to content
SAU Community

Recommended Posts

Morning everyone,

I'm currently looking into where I am going to get my car serviced and was interested in knowing if anyone has had theirs done at UAS.

This will be my first major service on the car, and as much as I could do it myself, I would like someone to check it out in case there are any things i'm not aware of.

I'm looking at a standard service + extras for oil and so forth which comes to about $380 for a service which includes flushing engine oil and coolant I believe + I want to get the gearbox oil changed as I doubt it's been done for a while..

I also realise UAS is a member on this forum, i'm happy for feedback from yourself as to how long a general service takes..

Was also after what people though after it was done and whether it is worth paying that much or going to a smaller mechanic more local to myself..

Cheers,

links

Link to comment
https://www.sau.com.au/forums/topic/89801-uas-standard-car-service/
Share on other sites

i've got nothing bad to say about John and UAS. good guys there and they certainly see their fair share of skylines which means they know what to look at.

If you are just after a service you could try polmar motors. and see my mate Eli or Pete. tell them the beer baron sent you. both top blokes and pete has been a close mate of mine since high school and is now a great mechanic.

Can't really comment on UAS as I've never really used them before (other than to buy oil/filters etc), but what I will say is that by using a performance workshop (whether it be UAS or someone else) to do general service work, you're probably going to end up unnecessarily paying a fair bit of additional cash to get the work done.

Any good mechanic should be able to easily do the service work you mentioned for a fair bit less. Provided you've got a good local mechanic, I'd get them to do your service work for you and leave any performance orientated work to specialists like UAS as then it becomes more worthwhile to pay a bit extra for their expertise.

Thanks guys - some great advice - Beer Baron, I called up Polmar when I first got the car and was going to get a service but put it off, i'll probably give Eli a buzz when I am going to do it as he's about 10mins away from me while UAS is about 1hr..

And I agree ECR033 on the point being that my car is pretty much stock except for Cat back and any decent mechanic should be able to look after it..

I'll hold off on UAS till I start modifying it.. that's when I feel it's probably worth getting someone who works on them a fair bit to check it out..

Cheers Guys..

btw - has anyone had their car serviced at UAS?

Eli + Pete will look after you. they both know their sh1t.

i've never had my car serviced by anyone but me (actually that's not true, Nathan at Grey imports did an oil change for me whilst complying the GTR, and he serviced the soarer once too). but both Polmar and UAS have done bits and pieces on my car and they were both very good.

I did a pretty big service on my GTR when I first got it at UAS and they do good work. He recommended all the good oils and parts and obviously the guys in the workshop have taken tools to many a Skyline in their time.

They are priced at the higher end of the list of workshops though. There are other workshops you can go where they are still knowledgable about turbo skylines but at the same time perhaps a bit cheaper for your general service needs.

Then again you can do a lot of the servicing work yourself as well if you have some basic tools and know what to buy.

I've had couple of services done at UAS and I would say most of the time jobs are done professionally and reliably. If you have your import serviced for the first time, UAS would defenitely be a good place for peace of mind. I'm however currently on a budget so can't really afford to have my car serviced there any more (not that what they charge is that bad). I now take my car to Nathan @ Grey Import as alot other fellow SAUers recommended and couldn't be happier with Nathan's experiences and those extra personal touch (in merchanical works ofcourse :mellow: )

If UAS was closer to us,,,we would use them more. John's always been honest with us in every dealing we have had with them. It horses for courses,,,,if you want to own a high-performance car you have to be prepared to pay more. Thats just a fact of life. Then again what the hell would I know,,,I left Nissan to work for BMW and I got my frontal labotamy done by my plumber.

Neil.

Oh the other great thing about UAS is they give 10% off to SAU club members :) So don't forget to show your card :D

good point, but just to clarify, the 10% is on parts, not labour. :D (just so john doesn't get people complaining he's not honoring the discount)

it's also yet another reason to become a SAU NSW member. :)

The main reason I probably won't end up going to UAS is the fact that it's in castle hill and i'm near north sydney.. working doesn't give me much time.. I realise he supports the site - that's the main reason I put this post up so I could get some feeback on what they are like..

Maybe if my car was more tuned i'd head over there.. just a bit out of the way..

Beer baron - did Eli mind you bringing your own oil's + filters.. was planning on getting it all myself for the engine, gearbox and a couple of other things and just taking them in..

I'm sure Eli wont have any problem with that. he is a pretty easy going guy. in fact it's good you know what you want, and if you ring him he could probably get it for you and have it delivered to the shop to save you running around.

Hey Links I'm in the same boat you are - only I live in Castle Hill! I was thinking about getting a major service done on my car anyway since I bought it recently but it's just past 105,000km..I was wondering if anyone had an idea of what the service interval is for these cars??

It's been a pretty informative thread - depending on how I go, I might end up seeing Nathan too

AF

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...