Jump to content
SAU Community

Recommended Posts

phhhpht... yous got it all wrong... wen get out of the car go and rip the fuel relay out so the fuel pump dont start... my mate did that with his vl thru hi school and never had a problem :)

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Bottom line is if they really want to steal it They will

had a mate who owned a vk Brock took it to calder took rotor button out took relay out for ignition the only thing we come up with is that they trailered it out whilst we were in side

or rolled it out. had a fellow in parramatta that lost a S14 the same way. new car (2004 when I did it.) had quiktrack on it. no problems now.

in regard to theft of vehicles, if I wanted a lot of vehicles quickly which would I do: ( I have a light truck licence btw)

find a group of mates and go pinch a few cars all at once OR

pinch a flatbed. have a think about that one..

truck is definetly the best way, if a theif really wants something quick and easily they wont stuff around with ur alarm they will just put it on a truck and leave quicksmart :P

which means that if you are really worried about your cars security either dont leave it anywhere or get a tracker as chris has said many times

A little trick a friend told me as he is a towie when you park you car, turn the wheel to full lock into the kerb then lock it, if thay try to drag your car up onto the tray the car will want to turn, which makes it that little bit harder to take.

Honestly IMO, the best way to install an alarm is to do it yourself, then everything is customised and not wired the same as every single car on the street.

I've got my entire alarm wired totally different to most or all cars, the box is actually on the left hand side of the car and all the wires are routed together with the stock wiring so when a crook pulls out the wiring it looks like there's no alarm attached...

Using a BW10000, I managed to get 4 pt immobiliser outta it, hooked up a pile of relays in parallel to each other...

got one for fuel, starter, power, ignition...

  • 7 years later...

Believe CHRIS ROGERS when he tells you anything about alarms ect. My r33 GTS-t wouldn't unlock the other morning and the immobiliser wouldn't turn off. I gave Chris a buZz and he came over. Turned out I had 2 alarms in my car and one died hence the issue. No bulkshit he had my car running in almost 45sec. He is the only one who put alarms in ANYTHING I drive. Because when he does it he does it with his own experience at hand and fits them so there as hard as possible for him so damn near impossible for anyone else. Chris's a alarm /Auto Elec GURU.

Thanks heaps for your help mate.

Maybe but the fellow that posted and bumped the thread was privy to me hot wiring and bypassing two alarms in under 45 seconds.

He has a right to be happy that I did it before a thief did.

Anyone recommend a good place on the Gold Coast where I can buy & get them to install the alarm PROPERLY..

I would try it myself as stated in this thread, but when it comes to electrics.. I'm fried :)

Not really looking for anything too exy, the car will be locked in fence and garage but still..

Edited by Zrobe

run it up to me and I will do it.

phone number in sig.

No worries, I'm on phone so couldn't see your sig.

Didn't realise you we're in Brisbane.

When I do get my alarm (probably not for a while, car is currently not running) I will take it straight to you.

Are you also able to remove my current alarm? Was on with the car when purchased and stuffs around every now and then.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...