What's Going On With Everyones Cars?

[TJHill]

another one? i think a mate may have one if you haven't got one already,

Yep....had a speedo cable for 2-3 weeks. Time for a few more nights in the shed

Edited June 27, 2011 by TJHill

[Addicted2BoostR34]

still working out my new camera from (RAW FORM) but this is my engine after powder coat...

[Mr. Untouchable]

look forward to seeing this splitter

haha nothing too fancy mate, going for a bit of a industrial look. I'm actually making up something very simular to Brad sheriff's, and Peter Nunns. except i'm going to run 4 adjustable turnbuckle braces from the front coming down. I'll post up pics when I'm done

[Funz]

haha nothing too fancy mate, going for a bit of a industrial look. I'm actually making up something very simular to Brad sheriff's, and Peter Nunns. except i'm going to run 4 adjustable turnbuckle braces from the front coming down. I'll post up pics when I'm done

build mine as im lazy and dont have time? ill pay you with a bucket load of... sarcasm and ridicule

[Mr. Untouchable]

ohhh sounds like a scam lol. Last fibreglass bar i worked on was Pisko's 350z bar after he stacked it at symmons. I'm still trying to get rid of the glass splinters haha. I'm not a fan but i need a whoop ass splitter, Mr Plow spec and its not going to build itself =)

[zoidbergmerc]

its not going to build itself =)

OR is it?

[Funz]

ohhh sounds like a scam lol. Last fibreglass bar i worked on was Pisko's 350z bar after he stacked it at symmons. I'm still trying to get rid of the glass splinters haha. I'm not a fan but i need a whoop ass splitter, Mr Plow spec and its not going to build itself =)

you going 40ft wing to balance out the car if you build a splitter?

[Mr. Untouchable]

Yes mate. big Sard or origin jobbie.

[pipster11]

what the go with that cruise tmrw? i've got to run some ppl to the airport at 1 so i might not be able to make it

[jangles]

twins

[toffy]

started on the respray on the dirty4 today and test fitted the kit

[jangles]

started on the respray on the dirty4 today and test fitted the kit

looks worth more now then it did before!!

[GODZILLA-GTR]

Purchased AFM's, hardpipe kit and Bosch 044. Next is, cam gears, injectors and re-tune

[Dave.TAS]

I've got a pair of genuine n1 adjustable cam gears if you don't want shiny hks/trust ones, or cheap and nasty ebays.

Dave 0409 631 092

[GODZILLA-GTR]

I've got a pair of genuine n1 adjustable cam gears if you don't want shiny hks/trust ones, or cheap and nasty ebays.

Dave 0409 631 092

haha im broke dave, if u have them in another month or so i'll be interested

[Mr. Untouchable]

Hi guys. Thought I'd post up a few pics of my front bar repair/mod progress. My front bar had a few decent cracks and had a fair size chuck missing on the lower front left hand corner so i went hell for leather with the glass. i chopped the bottom of the bar off level as the bar was lowest at the rear so it would of made the splitter sit up at a nasty angle. I've used ally sheet as the splitter itself. its 700mm deep and protrudes past the bar 5 inchs in the middle and just over 4 at the corners fadding back to inch at the sides. the ally is bolted to the bar in the middle and at the rear corners and i have just test fitted the 4 turnbuckle braces also.

just finished buzzing back the paint on the major surfaces and i have scotched the rest of it and i have put a light dust coat of etch over it as guide coat really, going to rub it down now with 400 ready for 3-4 coats of primer.

not going to be crazy fussy as its more of a prototype, looking forward to getting it on the car and eventually I'll buy a new bar and go again.

I've basically tried to replicate what is on Peter Nunn & Brad Sheriff's R32's.

cheers

[Wogboy]

Nice job! But for the ground effect to work you need to roll maybe two thirds of it up so that it's basicly like an upside down wing, if you look at V8 super cars you'll know what I mean. That's what I plan to do with mine, when work permits. Just my thoughts

[Funz]

looks awesome jack! i think you should make mine

[Mr. Untouchable]

Nice job! But for the ground effect to work you need to roll maybe two thirds of it up so that it's basicly like an upside down wing, if you look at V8 super cars you'll know what I mean. That's what I plan to do with mine, when work permits. Just my thoughts

Thanks wogboy. yes my plan is to tig or bolt two brackets at the back of the splitter and run some straps up around the sway bar with a 10mm thick anti vibration foam stuck to the splitter below the K frame. that way i can pull it up tight and if i run the straps I have here they have clips so they can be quick release should i want to get the bar off easily. I dont really want to mount it solid at the rear but I will if i have to.

looks awesome jack! i think you should make mine

ohhh I'm all splittered out atm lol.

[zoidbergmerc]

That looks badass Jack! well done.

I've always wondered, how do you actually know if your splitter is working when you've put it on? is the the difference that major?