Jump to content
SAU Community

Recommended Posts

as per PM reply brendan, you'll have alot of trouble making them fit (particularly since i get the feeling you want to put them on the front - talking about clearing big brakes)

if you are set on te37's get some 18x9.5+12's all round but be prepared to pay a mint as your pm suggests you want brand new ones

as per PM reply brendan, you'll have alot of trouble making them fit (particularly since i get the feeling you want to put them on the front - talking about clearing big brakes)

if you are set on te37's get some 18x9.5+12's all round but be prepared to pay a mint as your pm suggests you want brand new ones

thanks for that info mate

probably go for 18x8.5" +35 as per attached

will put big brake kit on track car project with bolton spacers & stag rear calipers

and throw the r32 gtr calipers allround (with new track pads) onto the stagea

wheel.doc

  • 2 weeks later...

Hi guys,

I'm New on the Board and i am really happy for so much stagea Fans!

I'm from Germany and i have an 260RS. In next time i will tell more about from my Person and the stagea!

I have two fast questions about the rims at the stagea. Is it possible to have an 8.5x18 et36 and 10x18 et37 rims without Problems? Know how Annone? Second, i have four 245/40 tires for this rims, is it ok to drive that on a 10J?? I really happy for your answers and tips.

Greefs from berlin

Edited by 260RS@R33Typ
Hi guys,

I'm New on the Board and i am really happy for so much stagea Fans!

I'm from Germany and i have an 260RS. In next time i will tell more about from my Person and the stagea!

I have two fast questions about the rims at the stagea. Is it possible to have an 8.5x18 et36 and 10x18 et37 rims without Problems? Know how Annone? Second, i have four 245/40 tires for this rims, is it ok to drive that on a 10J?? I really happy for your answers and tips.

Greefs from berlin

Hi and welcome!

You HAVE to keep the same rolling diameters between the front and rear. If you run the same tyres on different sized rims, it will not work. The rolling diameters will be different because of the stretching of the rear tyres to fit over the 10" rims.

You should try and find a set of wheels and tyres that are the same size and width front and rear, or you will have BIG and expensive problems with the transfer box after you drive it for a while.

  • 5 weeks later...

Helo Guys,

just to confirm this.

18x9 +20 5/114.3 fitted with 245/40R18 will fit onto the 260rs? Cos i read somewhere in this thread that i wll need spacers and longer wheel nut for the rear rims.

thanks peps.

  • 2 weeks later...

I'm not sure if they will fit without hitting on the strut, if they do fit then they will be sunken inside the guards heaps.

Also, for an RS4 due to the ATTESSA system you would be better off running the same width front and back, unless you work out the tyre sizes so you can maintain the same front and back rolling diameter.

G'day All,

Nice thread, heaps of info on offset for manuals, just a little about offset for autos though?

My Partner is in the process of buying herself a completely stock std S2 RSFourV Tiptronic Stag.

Stag to be lowered on Tein Wagon S-Tech Coils - Then She wants some nice rims!

Short of me trying my R33 GTR and AU Falcoon rims (when we get it home), can some smart person suggest the best offset for 18 x 8.5-9 rims all round - considering from what I have read the auto has a wider rear end in it compared to manual.

Advanced thanks for your time and info,

Cheers Mike.

14911431.jpg

Hi is anyone running 19x9.5 +12 on a rs four s without rolling the guards or is this to aggressive! Sorry if this has been covered! Thanks in advance for any help

That is exactly what I run. No guard rolling. 245/35/19 tyres with acceptable rear camber. 330mm ride height

That is exactly what I run. No guard rolling. 245/35/19 tyres with acceptable rear camber. 330mm ride height

Thanks your is exactly how id like mine to sit! Is there any more room under the front guards with the 34 front compared to standard??

  • 2 weeks later...
rims :- RAYS LM GT4

size :- 19 x 9.5 +30 offset

tyres :- Dunlop Maxx SP

size :- 19x35x245

fits a lowered m35 without rolling the gaurds thus far.

Thats mad. Look at those things! More photos please!!! I'm glad you didn't give up or listen to the "mechanics..."

:P

edit- found pics! NICE :yes:

Edited by PN-Mad

ok, ive tried figuring this out for myself here...

would 19x9.5+15 fit a stagea?

or +22? (theres a sick set of Rays GT-C's on a website that i've got my eye on)

and whats the deal with the 260RS? rear offset is different to the front yes?

if those offsets are wrong could someone tell me what offset i'd need to run 19x9.5's (or 10's if possible...)

thanks Brendan.

ok, ive tried figuring this out for myself here...

would 19x9.5+15 fit a stagea?

or +22? (theres a sick set of Rays GT-C's on a website that i've got my eye on)

and whats the deal with the 260RS? rear offset is different to the front yes?

if those offsets are wrong could someone tell me what offset i'd need to run 19x9.5's (or 10's if possible...)

thanks Brendan.

What model C34 do you have?

Auto?

manual?

260Rs with Brembo's?

That will determine what fits

When looking at Rays wheels against width and offset there is a couple of things to consider

Depending what on the offset on a certain size will deteremine what the caliper clearance is as referred to by Rays as disk type A, B or C

If you check out the Rays site, find the wheel you want, pick a size and compare it to the charts. If you need a "A" disk clearance, the offsets are different when compered to a B or C disk

Example

I run Rays's GT-C's Face 2 in a 19x9.5 +12, manual rear end.

Check the charts and you will see they are a "B" disk with 86mm outer rim (dish) Only just clear (1-2mm) r34 GTT 310mm dia brakes.

If I went to 19x9.5 +11, only 1mm different in offset, but they are a A disk (fit over brembo's) but with a 73mm out rim (so less dish)

Hope this helps.

http://www.rays-msc.com/wheels/index.cgi?d=19

http://www.rayswheels.co.jp/2009/products/...mp;for=domestic

Edited by darrinspencer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...