Jump to content
SAU Community

Recommended Posts

as per PM reply brendan, you'll have alot of trouble making them fit (particularly since i get the feeling you want to put them on the front - talking about clearing big brakes)

if you are set on te37's get some 18x9.5+12's all round but be prepared to pay a mint as your pm suggests you want brand new ones

as per PM reply brendan, you'll have alot of trouble making them fit (particularly since i get the feeling you want to put them on the front - talking about clearing big brakes)

if you are set on te37's get some 18x9.5+12's all round but be prepared to pay a mint as your pm suggests you want brand new ones

thanks for that info mate

probably go for 18x8.5" +35 as per attached

will put big brake kit on track car project with bolton spacers & stag rear calipers

and throw the r32 gtr calipers allround (with new track pads) onto the stagea

wheel.doc

  • 2 weeks later...

Hi guys,

I'm New on the Board and i am really happy for so much stagea Fans!

I'm from Germany and i have an 260RS. In next time i will tell more about from my Person and the stagea!

I have two fast questions about the rims at the stagea. Is it possible to have an 8.5x18 et36 and 10x18 et37 rims without Problems? Know how Annone? Second, i have four 245/40 tires for this rims, is it ok to drive that on a 10J?? I really happy for your answers and tips.

Greefs from berlin

Edited by 260RS@R33Typ
Hi guys,

I'm New on the Board and i am really happy for so much stagea Fans!

I'm from Germany and i have an 260RS. In next time i will tell more about from my Person and the stagea!

I have two fast questions about the rims at the stagea. Is it possible to have an 8.5x18 et36 and 10x18 et37 rims without Problems? Know how Annone? Second, i have four 245/40 tires for this rims, is it ok to drive that on a 10J?? I really happy for your answers and tips.

Greefs from berlin

Hi and welcome!

You HAVE to keep the same rolling diameters between the front and rear. If you run the same tyres on different sized rims, it will not work. The rolling diameters will be different because of the stretching of the rear tyres to fit over the 10" rims.

You should try and find a set of wheels and tyres that are the same size and width front and rear, or you will have BIG and expensive problems with the transfer box after you drive it for a while.

  • 5 weeks later...

Helo Guys,

just to confirm this.

18x9 +20 5/114.3 fitted with 245/40R18 will fit onto the 260rs? Cos i read somewhere in this thread that i wll need spacers and longer wheel nut for the rear rims.

thanks peps.

  • 2 weeks later...

I'm not sure if they will fit without hitting on the strut, if they do fit then they will be sunken inside the guards heaps.

Also, for an RS4 due to the ATTESSA system you would be better off running the same width front and back, unless you work out the tyre sizes so you can maintain the same front and back rolling diameter.

G'day All,

Nice thread, heaps of info on offset for manuals, just a little about offset for autos though?

My Partner is in the process of buying herself a completely stock std S2 RSFourV Tiptronic Stag.

Stag to be lowered on Tein Wagon S-Tech Coils - Then She wants some nice rims!

Short of me trying my R33 GTR and AU Falcoon rims (when we get it home), can some smart person suggest the best offset for 18 x 8.5-9 rims all round - considering from what I have read the auto has a wider rear end in it compared to manual.

Advanced thanks for your time and info,

Cheers Mike.

14911431.jpg

Hi is anyone running 19x9.5 +12 on a rs four s without rolling the guards or is this to aggressive! Sorry if this has been covered! Thanks in advance for any help

That is exactly what I run. No guard rolling. 245/35/19 tyres with acceptable rear camber. 330mm ride height

That is exactly what I run. No guard rolling. 245/35/19 tyres with acceptable rear camber. 330mm ride height

Thanks your is exactly how id like mine to sit! Is there any more room under the front guards with the 34 front compared to standard??

  • 2 weeks later...
rims :- RAYS LM GT4

size :- 19 x 9.5 +30 offset

tyres :- Dunlop Maxx SP

size :- 19x35x245

fits a lowered m35 without rolling the gaurds thus far.

Thats mad. Look at those things! More photos please!!! I'm glad you didn't give up or listen to the "mechanics..."

:P

edit- found pics! NICE :yes:

Edited by PN-Mad

ok, ive tried figuring this out for myself here...

would 19x9.5+15 fit a stagea?

or +22? (theres a sick set of Rays GT-C's on a website that i've got my eye on)

and whats the deal with the 260RS? rear offset is different to the front yes?

if those offsets are wrong could someone tell me what offset i'd need to run 19x9.5's (or 10's if possible...)

thanks Brendan.

ok, ive tried figuring this out for myself here...

would 19x9.5+15 fit a stagea?

or +22? (theres a sick set of Rays GT-C's on a website that i've got my eye on)

and whats the deal with the 260RS? rear offset is different to the front yes?

if those offsets are wrong could someone tell me what offset i'd need to run 19x9.5's (or 10's if possible...)

thanks Brendan.

What model C34 do you have?

Auto?

manual?

260Rs with Brembo's?

That will determine what fits

When looking at Rays wheels against width and offset there is a couple of things to consider

Depending what on the offset on a certain size will deteremine what the caliper clearance is as referred to by Rays as disk type A, B or C

If you check out the Rays site, find the wheel you want, pick a size and compare it to the charts. If you need a "A" disk clearance, the offsets are different when compered to a B or C disk

Example

I run Rays's GT-C's Face 2 in a 19x9.5 +12, manual rear end.

Check the charts and you will see they are a "B" disk with 86mm outer rim (dish) Only just clear (1-2mm) r34 GTT 310mm dia brakes.

If I went to 19x9.5 +11, only 1mm different in offset, but they are a A disk (fit over brembo's) but with a 73mm out rim (so less dish)

Hope this helps.

http://www.rays-msc.com/wheels/index.cgi?d=19

http://www.rayswheels.co.jp/2009/products/...mp;for=domestic

Edited by darrinspencer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...